Mac

Want to buy a factory radio support bracket for a standard Ford AM radio used in a 1966 Mustang that mounts to rear of radio.

The piston itself could be rusted and possibly sticking. Suggest removing the sticking caliper then opening the bleeder screw and then...

Thanks for the info. Replaced just about everything there is in the cooling system. Went with a 160 deg thermostat. Now reading is...

Deci decided to go with a 160 deg thermostat. Installed it and temp now is approx middle of gage but will creep up if I let it idle...

Using a ford 6 blade fan that sits half in half out of shroud. No AC. No trans cooler, auto transmission lines are connected to bottom...

Able to see water flowing after thermostat opened. Have the correct water pump installed. Will be installing a new instrument voltage...

Forgot to mention timing set to spec and a new temp sensor & radiator cap.

OK guys, let me pick your brains. My 66 289 is running hot, after idling awhile, gage goes around the "P" on the "temp" letting on...