Help Support 7173Mustangs.com:
R
rvrtrash
- Messages
- 699
- Reaction score
- 62
Latest activity Postings About
-
-
Rrvrtrash replied to the thread Turbo vs supercharger.I don't have first hand knowledge of this, haven't done it myself, but my son has been in to the turbo scene for a couple of decades...
-
Rrvrtrash replied to the thread Fuddling electrical failure 72 convertible.According to Hemikiller, the ground strap my car had was not original. Basically, there has to be a ground between the battery and the...
-
Rrvrtrash replied to the thread Fuddling electrical failure 72 convertible.Also check the ground strap that runs from the rear of the engine block to the firewall. On a '72, it's a flat, braided copper wire if I...
-
Rrvrtrash replied to the thread 4300D carb and fuel filter.I second that opinion.
-
Rrvrtrash replied to the thread Unrestored Boss 351.Air wasn't an option, and usually dealer installed air had the evaporator and controls under the dash as a separate unit. Way to much...
-
Rrvrtrash replied to the thread "X" paint code question.I went through this with a 1969 XL Convertible I had. As far as I know, the only way to figure out what the original paint color was is...
-
Rrvrtrash replied to the thread hi all from Vancouver wa.Welcome from north Idaho. I used to live in Vancouver, back in the '80's.
-
Rrvrtrash replied to the thread Speedometer cable and gear reduction adapter.The ratio is .75. I need one for my car also.
-
-
Rrvrtrash replied to the thread Subjective Question: To Boss or to Mach 1?.The 1969 and 1970 Boss cars were either Boss 302 or Boss 429. In 1971, the only Boss was the Boss 351. All three had specially prepared...
-
Rrvrtrash replied to the thread Which 1971 engines came with the C6.I believe the 429 got the big block C6, the 351-4V got the small block C6, the 351-2V got the FMX and the rest got the C4.
-
Rrvrtrash replied to the thread How each of us perceive a car project.....The car is definitely savable, and if you enjoy restoring cars, the time wouldn't be an issue, but with what it needs, I would say half...
-
Rrvrtrash replied to the thread Master cylinder question..You can buy adapters to change the size of the fittings, but it sounds like they gave you the wrong application. I'd take it back and...
-
-
Loading…
-
Loading…
