Steve73QMach1

I have two Mach 1’s and both were missing the latch pulls for the trap door. I was unable to find replacements so I made my own. Here’s...

Just a post to say hi! I haven't interacted on here but as I get more into restoring my 73 I hope to. The car is an original 1973 coupe...

The glove box light takes an 1895 bulb. The same bulb is used in the headlight switch, wiper switch, and cigar lighter. I think those...

Hope everyone is having a great weekend and Happy 4th! I got back into this center gauges project again today. Added a 12 to 6 volt...

Here’s a couple of photos of my passenger side window motor repair. The window had quit working all together. I took the regulator/motor...

There’s a template in the shop manual but I just removed mine by taking the motor and regulator out as a unit. No drilling required. You...

My gauge package is complete…. It’s a baby Autometer…🤣…Someday it will grow up to be a big Autometer!!

Yours may be from a 71-73 Cougar. I see that same harness on the West Coast Cougar web site and they do indicate that it is for a 71-73...

The light socket in my photo is the one with the black and pink striped wire and the green and yellow striped wire. The green-yellow...

The glove box takes an 1895 bulb. I don’t see your bulb socket in the photos. Here is a photo of the correct bulb and what the socket...

Been a long minute since I posted and Life has been pretty crazy, but this old girl still runs great and makes for a great time.

Here is a comparison of the senders for the lights versus gauges. The oil pressure sender for the gauge is the big bell shaped device on...

Mel - the standard 3 gauge cluster will fit to the dashboard of a non gauge car with no modifications. It looks like your interference...

In addition to what Don says about the sending units, what did you use for power to the temp and oil pressure gauges? That needs to be...

Here is some documentation that should help. In the section on Emission Control devices the Fuel Vapor Control section is a pages into...