tkelley72

Great info Hemi! I really appreciate it. Maybe I can get this thing straightened out.

I do have that port. So that is the one that connects to the distributor vacuum advance and the one below at an angle is to be capped ...

At the risk of looking like an idiot, which port is the ported vacuum? The one on the top? My distributor is a stock replacement with...

I have been having problems with the Holley 600 carb. on my 72 vert. 302. I had someone that supposedly knew what they were doing work...

Good idea regarding the float, and I appreciate the suggestion about the Desert Classic unit but $160 is pretty steep. Is there not an...

OK, so I have completed all the testing recommended and have determined that my fuel sending unit is in fact bad. Now I need to...

Thanks guys!

Can the instrument panel be removed without removing the dash pad? Can I just remove the 5 screws and tilt it down to access the bulb or...

I must not be living right! While working on another unrelated issue (fuel sending unit) I happened to notice that the left turn signal...

One last question. If it turns out to be a defective sending unit, who sells the most reliable product? The one that's in there is only...

I do have plenty of gas, at least 1/2 tank as the gage was working up until yesterday and I had put gas in it a couple of days ago. I'll...

Need some more expertise from the experts please. Got in my car today and noticed that my gas gage has stopped working. It worked fine...

I have been considering the same thing on my 72 Convertible. I was looking on line for available options and found this stuff that...

As usual, great input from everyone. Thank you. Maybe I'll "cowboy up" and give it a shot?

Doing a rebuild is beyond my personal skills. Thought maybe it would be something simple like trash in the carb. that could be cleaned...