Search results

That's interesting. The car that this block came from could very well have been converted from an auto to a manual transmission at some point. The block is a D0AE-L 4 bolt mains. What exactly should be there? Sounds like this was not the standard setup for a 71/73 Mustang with a manual trans?

Hello, wondering if anyone can identify exactly what the part I have circled in orange in the picture is? I know this block came from a 73 Mach 1 that had a manual transmission. I'm thinking the clutch is connected in some way here at a guess? The car had previously been crashed I recall seeing...

I bought and installed one of these a few years back: https://www.holley.com/products/fuel_systems/carburetors/performance_2_barrels/parts/0-4412C Converted it to electric choke so bought the extra bits to do that. Left the original stock 2v manifold in place. I have the aftermarket ram-air...

I purchased a blue set from TMI which I recently installed. I converted from the standard door panels to the deluxe and found out that the door pull requires a metal bracket (not reproduced and they do not come with the aftermarket door pulls) and the door latch is specific to either type so...

Hi, I am about to get my rear glass panel installed back into my 71 Mach 1 and decided to get this particular job "professionally" done. I have read a few posts on this site and have noticed that foam should be installed before placing the glass onto the car. I mentioned this to the installer...

My Mach 1 has no brake booster (drum brakes front and rear). I was thinking of adding something like this: http://www.cjponyparts.com/master-power-brake-booster-conversion-kit-1971-1973/p/BBCK4/ Wondering if anyone has tried this upgrade? I am planning on upgrading the front to disc brakes also.

I took a chance and purchased one of these kits on eBay that has the foam seals for a NON AC 1971 Torino Heater box: http://www.ebay.com/itm/290881433535?ru=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26ghostText%3D%26_sacat%3D0%26_nkw%3D290881433535%26_rdc%3D1 If the link above...

I had the same question 12 months back. After reading some posts here and watching the odd youtube video this is what worked for me: I decided to start with the door aluminium weatherstrip channels first (removed from the car). First thing was to remove the old rubber residue plus previous...

I am wanting to repaint my original 14x7 steel wheels. I will be using the "Ford Motor Company" dog dish caps with original trim rings. I had thought about painting the wheels black but read somewhere they may have been painted Dark Argent. Wondering if anyone knows what color/paint code they...

Hello, I'm sure this has been asked before! How can I be certain from the Marti report if my car was ordered with the deluxe or standard door panels? My 72 convertible has the deluxe panels currently but I don't see anything on the Marti report that suggests it was ordered that way. The current...

I installed a pair of the reproduction drip rail moldings on my 71 Mach 1 a few months back and they went on nice and easy. They look good too. Maybe a touch thinner than the originals mostly at the ends in my opinion but still happy to have installed them. I would use them again. Would be nice...

Have you still got that crossmember?

Any recommendation/suggestions on somebody who can repair 71-73 Mustang radios? I have a "dead" radio that I bet the right person could get going again. I am using a Retrosound radio in place of the original though have kept that in a box for storage. Regards, Kerry...

Hi, I'm after the two brackets that go between the hood latch bracket and front grille (Mach 1 type). I don't need the rest of the latch assembly. I can easily clean them up so I'm not concerned too much on the condition. Kind Regards, Kerry...

I was wondering if somebody could point out where the brackets in the photo go exactly? I originally pulled these parts from the rear seat area (71 Mach 1, non fold down seat) but forgot to take any photos. Now that I'm putting it back together I'm not 100% sure these go. Any help/photo would...

Hello, does anybody know of a modern substitute for the lock nuts/caps that go on the two heater control cables to help prevent the cables from slipping off? I've had attached a photo for reference and circled the area I am referring to.

Sorted...

Hello, I'm after a Boss 351 carburetor (D1ZF-ZA) restored/unrestored. I know these are rare! If you have the real deal I am keen to talk.

Hello, since I've had my car (71 Mach 1 Fastback) the driver's window wiper misses a section of the front windshield each time it passes, ie. the blade doesn't contact the glass. The wiper blade at the top and bottom touches the windshield and wipes away the water but the center part of the...

I am after a Crankshaft Pulley (with Power Steering option) for a Boss 351 engine rebuild. The stamped number on the pulley should read D1ZE-6312-BA (Ford part number D0ZZ-6A312-A). Alternatively does anyone know of a good substitute? I've heard D2OE-6312-BA may work. Many thanks...