Search results

I’ve tried 3 different headers so far, I have the 72’ 351C converted to 4 barrel with power steering, AC has been removed , the last set of headers hit the starter - so I need to by a smaller starter?? Additionally I’m swapping EFI. and if I get shorty headers- will that really affect my EFI...

I came up on these 2007-2009 Shelby GT500 rims (M-1007 S-1895 )but all four are 18x9.5” I pretty much bartered for, they are beautiful but not sure if I can use them. After reading a few big wheel and rim threads I don’t think it’s possible Other threads have maxed out at 18x9” for the front...

This is the ford am/fm tape player made by Marume in Korea so probably an aftermarket? Sent from my iPhone using Tapatalk

Sorry I misspoke didn’t take off the radiator, just the fan Sent from my iPhone using Tapatalk

Need to find a good junkyard or home for all this stuff! Front and rear shocks, coils, upper and lower control arms, replacement spring perches(new), intake manifold 2 barrel , seatbelts(red), old 8 track radio, vents for cowl, exhaust pipe tips plus rusted pipes , original headers 2 barrel I...

The louvers are metal! All the fingering should be done inside I figured as I was thinking about doing the rear view camera for $20 at least for backing up , as far as changing lanes-good luck everyone else! Sent from my iPhone using Tapatalk

Dude, I was cursed with “ I want to do my headliner for $50”. I ended up buying the new seal for the rear windshield, seals for the rain gutters, windlace to hold the headliner, headliner/upholstery glue, window-weld/butyl with a caulking gun , tinting the window, and new trim clips , plus the...

I picked off some rear disc brakes from a mustang restoration shop and he said he was sure they were off an 87-92 SVO? Install went fine on one side however I’m missing a parking brake Clevis shackle , the calipers are Ford stamped with a 2431–C and B with a circle stamped on the calipers. I...

I got the mustang towed from the mechanic shop today and started looking into replacing relays and chewed up wires above the glove box

Got the 351C assembled, timed, running! Sounds like a beast without an exhaust! Sent from my iPhone using Tapatalk

Work in progress at my friends shop. Sent from my iPhone using Tapatalk

Oh man!! I’m still stuck at this part ,make a bracket set and sell me it! Sent from my iPhone using Tapatalk

Leaf springs replaced and painted the Spring plates red! That gave her big phat booty almost a full 1” lift Sent from my iPhone using Tapatalk

Welcome from SoCal! My brother lives in Stanton-Midland area! Big ass state to drive through l! Sent from my iPhone using Tapatalk

Looking for : aftermarket louver for the 72’ Front grille Chin spoiler I did cut the hoses from cooler to the compressor, sorryin advance if the hoses were valuable. All of it is untested . Sent from my iPhone using Tapatalk

Santa got me my finishing parts of the suspension system I was really looking forward to, some 1157 led bulbs for the rear and front as well as a classy license plate frame

Sorry I had to take this salty girl out of SD!

Thank you,! And yes I definitely love the metallic and sheen look. It’s most likely salvaged from a rear end/side impact collision on the passenger quarter panel and bumper. The bumper brackets/bumper are warped and but quarter panel was well filled and refinished with bondo...

Thank you for the support, it really is a great motivator in our line of work. I believe the salvage title was mainly because body related damage. The passenger quarter panel has had a gallon of filler applied prior to paint and the wiring I’m pretty sure now it’s from the wires near flashers...

Thanks for the feedback![emoji57] Its been fun! Sent from my iPhone using Tapatalk