Search results

Thanks, I'll take a look. Chuck

Welcome from Oklahoma. Chuck

I'm considering upgrading the headlights on my 2007 Mustang and 2002 F-250. After spending hours in the Google rabbit hole on the subject, I still can't find much results based information. It is mostly "Our's is the best!" or some , they are brighter but, focus and beam width are off. Does...

The ramps are there on late 70 B2s and 71 B1s, and 72 HOs. Chuck

Just put it on and not worry about it. Chuck

Welcome from Oklahoma. Chuck

It sounds nuts but, double layer of soft towels, a piece of 2" x 4", and a carefully used dead blow hammer. Minor adjustments can be made with shims under the fender at the bolt holes. It worked for me with no damage to the paint. Chuck

Good for you! Congrats. Chuck

What Rick said. Chuck

I've used 3M finesse-It machine polish (PN 05928), and a Dremel tool polishing pad(s). It is small enough to get into the crevasses. Use on slow speed and be patient. Excess polish can be removed with mild soap and water. Chuck

Well done! Chuck

Welcome from Mustang, Oklahoma. Chuck

Thank you very much. Chuck

Hemi, Thanks for the helpful information. Rumor has it that the CJ governor has a higher shift point at WOT. Any thoughts on that? Chuck

The tag decodes as column shift on the gear selector, too bad. Chuck

Thanks for the information. I don't have the tail shaft housing off yet. I will post the tooth count when I do. On gear ratio, my guess would be 3.00 or 3.25. The car is LONG gone. I also have the engine which may be scrap, locked up hard. It has never been apart before so there may be some hope...

I was given a C6 transmission removed from a 1972 Torino 351C 4v. The case is badly broken so, I'm taking it apart to save the good bits. The tag reads PGA AF1. I believe the convertor, flex plate, governor, and servo (L) are somewhat unique to the 351CJ models. Is the valve body, or other...

Here you go. Chuck https://www.dennis-carpenter.com/trucks/transmission/gear-shifter/e0sz-7341-b-transmission-shift-rod-bushing?srsltid=AfmBOoqlfd0JN6GOLnyBDKeqc11prnEmzPrhZuh1v26GPXMikyGix1AzFFk

Pertronics full 12V fix. https://desertclassicparts.com/product/ignition-power-relay-for-pertronix-ignitor-ipr-ford/?fbclid=IwY2xjawFub41leHRuA2FlbQIxMAABHVvdDayYQFXLrgW_PLaEBbm6r-QN5NcxcE4ndfW2FMQ3exR5epvsSpquGA_aem_isFaBjNCag4CdCA25Y5z4A Chuck

Try looking here. Chuck https://www.classic.com/