Search results

Other jobs I have been doing is more trim repairing.... Before.... After.... Just needs stripping and repolishing now,  But that's another piece on the car saved. Interior Instrument lense Now this job has taken hours!  There is a shadow in the clear plastic I can't shift, but overall...

Got a bit more work done on the car yesterday, Cur to size the Rear LHS replacement floor pan and cleaned up the area in prep to get welding done.  also found a few more holes so cut out the area requiring sheet metal $20, repo panel from NPD Cleaning up the cut out area and CAREFULLY...

:wrench: Hello from across the Pond

:whistling: Sometimes, Less is more!

And don't forget the Canadian forces ;)

Hi, My car is a 71 and I have purchased the beltline weatherstrips The kit i bought was from NPD, made by PUI, NPD Part No 21455-4BR  The top outside PUI weatherstrip is wider than my original weatherstrip, the weatherstrip also has the clips pre-fitted to push into the door slots. On...

Yes I too have watched that video, clearly the guy is a professional.  I did notice he also recut the welds a few times because he was not happy. Interesting use of the hammer handle to push the sheet metal together :)

Nuts!

Well after removing my broken door handle, I found 1 Spring missing and anther one broken! Now searching around on the net it seems that you can't just buy a replacement door spring.  The handles normally come as a complete unit. So how to make a replacement spring..... The spring type is...

Great job on that PDF Thanks for taking the time to write things up.

Thanks David, I have just got a box of that 3M Black strip caulk, I did read your post on the roof rails. The caulking that seems to be on the roof rails is light grey / white (like the caulking you show in the picture above from MD Products) Question, Should I also be looking to get the...

Lift the carpets and check for rust!, Take a torch and shine it into the cowl area and check for rot / rust! Check for rust under the battery tray area. If the car has A/C Check to see weather it's been converted to run on R134 / R134a Check bottom of Heater box passenger side, make sure...

I was thinking of using a gasket and either rivets or self tapping screws, I would not dream of welding the stainless to the mild steel, Galvanic corrosion would set in fast! Dog bowl is a good fit  :D

That's pretty much what I was thinking  :D Cut the hole, butt weld around new to old metal, make good the welds, weatherproof and paint then make a gasket and fit fidos bowl :D The problem might be getting the bowl into the new plated cowl area?

These guys have a range of stuff, I would call them to check your application :) https://www.cvfracing.com/ford-water-pump-pulley-302-351w-351m-400-underdrive/

Back to working on the inner cowl today, I ordered some 1mm sheet metal and then set about trying to replicate the cut out shape.  I grinded the collar off the part to give me a better idea on what im working with. After a couple of hours with a 2,1/2 lb hammer and a ball end hammer, I...

:goodpost: :thankyouyellow: :bravo: Thank you again,  this really is the information one needs. Yet again I find another non stock part on my Johnny Cash "One piece at a time" Junkyard dog.

I'm not sure about the serial plate on my pump?  It reads..... (Top row).........    HBA        EZ (Bottom row)....    1  2I  W  77 What do the EZ letters mean?  Are the HBA letters the important ones?

Thanks for the information :)