Search results

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    1965 K-code Mustang Repair

    Kevin, One of my buddies just rebuilt a 65 fastback utilizing all Dynacorn panels. He basically jacked up the roof, A pillars and back window opening and put all new floors, front frame rails, aprons, one piece floor, firewall and dash. All worked out well and parts mostly fit well with a few...
  2. C

    Ignition switch 73 mach 1

    If your talking the module with the electric plug not the actual "key" tumbler, unfortunately it cannot be done. Dropping the column is actually quite simple. Just be careful with loosening and tightening the attachment nuts, the studs easily break off the column. Thanks, Jay
  3. C

    The adventure continues…

    Just another reason why the USPS is a money eating machine that is always hungry and has **** service..... Thanks, Jay
  4. C

    Do you drive?

    I Drive.... I have my Mach 1 and Model A and probably drive about 5K a year..... Thanks, Jay
  5. C

    Describe what you do for a living...BUT, descibe it very poorly!

    I am employed to do anything and everything that no one wants to do at that particular time....
  6. C

    Distributor gear roll pin. Need some expert guidance.

    Valvoline VR-1 oil is also made in 10-30 and 10-40. You will need to special order it at most chain auto parts stores. My local speed shop has all the mentioned grades on the shelf. Thanks, Jay
  7. C

    First Time Valve Cover Removal

    Ken, What a wonderful find....  
  8. C

    255 vs 275

    I am also running the 255/60/15 at the rear on a 8" rim. I agree they are the perfect size and look for our cars. Thanks, Jay
  9. C

    71 429 Clutch Equalizer Pivot Bracket - Any out there?

    I also had to fabricate one for my conversion. I used parts from the original 351C one and made a new mount from 3/16" plate and worked well. Thanks, Jay
  10. C

    What did you do to your car today?

    Ken, What a beautiful car for sure.... Thanks, Jay
  11. C

    Need some engine advise

    Thank the Lord for the Big Block Ford.......
  12. C

    My 1973 Mach 1 will be part of insided display at 2021 Ford Nationals @ Carlisle Penn.

    David, Congrats on the honor of displaying your Mach 1, I will be looking forward to seeing it for sure.... Thanks,Jay
  13. C

    Brake switch connector

    The connector for my 73 also broke when I tried to remove. I just cut it off and used crimp type connectors on it. Thanks, Jay
  14. C

    Clock removal

    I had Rocketman change mine to quartz movement and it never worked better and it keeps time as good as my daily driver. Thanks, Jay 
  15. C

    73 Mach 1 part out or complete package

    Looking for rear window trim, complete or right side upper. Let me know. Thanks, Jay
  16. C

    Another Pertronix Question...

    Guys, I converted to Duraspark last winter on my 460 and will never look back to points, unilite module failures or others Pertronix issues. The installation was straight forward and I grabbed the 12v feed at the point where the resisitor wire ties into the ignition switch. This way I left the...
  17. C

    71 - 73 Seat Upholstery - Distinctive Industry or TMI ?

    I installed TMI deluxe covers and foam on my Mach 1. They fit very well with good comfort. During a recent cleaning, after about 3 years since installed I found a couple of splits in the vinyl on the bolster of the drivers seat. I do not believe anything can be done with it to correct, just an...
  18. C

    Distributor (D0OF=12127-V) and 4V manifolds

    I have a driverside exhaust manifold that I would "Pay it Forward" if you like. It would probably be about $20.00 or so to ship. Let me know by PM. Thanks, Jay
  19. C

    Ebay J-Code

    Whats up with the left front fender flange cut up ? Possibly to see the VIN ? Thanks, Jay
  20. C

    351C 4bbl Exhaust Manifolds

    PM sent
Back
Top