Search results

I will try to post that picture, Don I am not sure I know how

I believe I would find me a replacement steering column that is not butchered up. If it is not a tilt wheel you can buy them for $100 bucks

Another thanks from Virginia. and welcome to the site

When I purchased my 73 someone had added a ground wire tapped into the ground running to the printed circuit board. When I removed the added wire I lost my dash lights. I traced the ground to the iginiton switch where I found one of the studs broken off that holds the igniton switch onto the...

The bolt with the nut works great,but install pump on the car and put the belt on it. only install the pulley just far enought for the belt to line up . If you don't do it this way you might put it in ltoo far and will have to remove it again.

There is a ground that attaches to the igniton switch . that is for the dash lights. on my 73 someone had broken a bolt off that holds the swich on and lost everything to the cluster.

Scotty lives off of route 15 between Clarksville va. and Oxford N.C. I have been to his place, nice guy to talk to

Welcome, I am from Virginia also. 35 miles west of Charlottesville

Welcome from Virginia Randy I have a cousin that lives in Lynhaven and I get down that way ever now and than. I will be in Foley Ala in March for two weeks.

The problem I see with a moble home furnace is that the return air is in the front of the furnace. If you have a celing in the garage you will have to duct the retun air to it from the floor area. cold air stays on the floor hot air rises. with the furnace in the celing your hot air will...

Welcome from Virginia. I will be in California in May

Here I am last Thanksgiven

Welcome from Virginia and Have a Merry Christmas

Can anyone tell me how hard it is to remove the POA valve from my AC. Classic air sent out a notice saying that when you convert from R12 to R134 you have to adjust the POA valve counterclockwise 1/4 turn. The best I can tell it is near the firewall next to the evaporator.

I have a 73 Q code conv. and just spent the summer trying to get motor mount to work. I have the clam shell type with the number 665 stamped on them. there is also one that has 663 stamped on them. I first tried the open kind that is glued together two pieces of metal with rubber in the...

welcome from Virginia. I also have a 73 conv. GREAT CARS!!!

Welcome from Virginia

Welcome from central Virginia I have a Q code conv. Love those ponies

I wanted to tell you this summer, I put in a poly transmission mount and I though my 73 was going to fly apart. I changed it out for a standard rubber mount and all viberations left.

Not long ago I took on a project to make my dash lights better. I found a web site www.mustangprojects.com that had a kit of led bulbs to replace the dash lights. To do this you have to take apart each instrument and take out the old blue dome because it has turned opaque with age. When...