Search results

No if it came with the convenience option then you would have a “parking “ light next to the headlight switch.

E-bay

Well I figured something out ,I got some small magnets and used 3 of them on the inside of the socket and it worked great. Now I know they make inserts for this but this was a lot cheaper and I can use them for other things. I also found a switch for the parking brake that was only $11.00 that...

I have a 73 Mach w/o a/c and I am in the process of putting a switch on the parking brake and found that the easiest way was to remove the outside air vent duct to gain access to the side of the parking brake. That being said as you may know it is not easy to get up under there but I was able to...

That’s what I was looking for thanks!!!

The is a switch in the seat belt retractor that opens when the belt is pulled thus turning off both the light and buzzer. All of which was disconnected in my car by the PO.

Thanks but I already got one similar to that from China and I would like to get one that is like a normal as in a little black cube with 3,4 or 5 spade plugs on the bottom.

That is the style of relay I’m looking for but I want it to turn off after 10 seconds.

👍

I have checked him out and they aren’t available.

I have looked all over the web for a specific type of relay and all I get is confused. What I want to do is make the seat belt light turn on for 10 seconds + -when I turn the ignition on then go off. I have connected 2 wires from the seat belt circuit and placed them in the engine compartment...

I have looked all over the web for a specific type of relay and all I get is confused. What I want to do is make the seat belt light turn on for 10 seconds + -when I turn the ignition on then go off. I have connected 2 wires from the seat belt circuit and placed them in the engine compartment...

I believe that is a circuit breaker you have there.

Thanks I’ll check them out.

I restored a 73 Corvette L82 about 3 years ago but being a Ford Mustang addict I sold it to get what I really wanted. However I can’t believe how few parts are available. I used to work at a Ford parts department and parts for mustangs were never a problem. I never had a problem getting parts...

Ok I’m an idiot, the reason was a bulb I failed to unplug all is good now I just need to find a simple 10 second or so timer to make the seatbelt light work.

Thanks for the help on my last post I'm actually making progress. Now I have a new dilemma, on the seal belt lamp and buzzer there are 2 set of wires a LG and a R-Y H and both have 12v going to them !? Now the PO added a Tremec 5 spd so I know he removed (cut) some of the wires and I located...

Thanks that helps a lot it confirms what I was thinking. You have to love the wiring diagram, I looked all over for the c-702 but only found the one near the key switch I totally missed the others.

The car is a 73 Mach 1 that I have been working on. This is one area on this car that can drive you crazy. I think I am starting to figure it out but I hav some questions. I do have a “ wiring diagram” i‘ll just leave it at that. I have a plug that I need to identify. I think it might be for the...