Search results

Today was the day. I ended up using a plasma torch to melt through the spot welds. 1 inch putty knife to break through the residual weld, and also the 3/8 inch belt sander to sand down the welds from the tail panel side inside the trunk. I just worked my way around carefully until it was free. I...

They ship the fuel line bent in half, you have to un bend it in the middle and two or three other places, and it's still not fitting correctly and bracing up like the OEM. I wish there was another way to do this.

Thanks Cleveland, That was my first impression

I got the new Fuel line from NPD installed, and almost at the very end where it connects to the tank, I'm seeing this small kink. Let me know if y'all think this will fly, or if I should check with NPD.

I broke my steering column tube trying to improve the actuator glide, I'm looking for just this part with the key cylinder.

Yes, I'm guessing the shipping to Texas is causing them to cancel

I'll get under there and make sure frame rails to pan are welded. I was concerned that the inside of the frame rails were untreated for rust. I'm still open to re-doing it if I can actually get a pan

Thanks for the info, I tried it twice and both orders were cancelled. Once from Amazon and once directly from Autoplicity's website.

@basstrix , i did just find both of the one way washers, nevermind my last comment

Hi @basstrix I can buy a new horn switch for about $100 from NPD, and reuse my weathered woodgrain and cover , Or I can get this entire used rig from Ebay for $150. the woodgrain is nicer condition. I'm not seeing any one way internal washers. I just see screws attaching the horn pad to the...

A fuel line kit is $71.99 at CJ Pony, and $98.84 at NPD I'm wondering if it balances out at shipping, but I'm noticing NPD prices are higher

thanks @giantpune , that's a two day job 🤣 I was thinking it was half a days work

Very nice. I'm will need to paint mine blue

What is the latest and greatest procedure and parts list from start to finish, to change out the timing gears on a 1972 H code, including advancing the 4degree ******** timing at the cam and distributor. I see the below post from hemikiller on a different site from 2022 that seems current...

pillar molds arrived safe and sound. Smooth transaction A+++, thanks again Joe

Thanks again @jomar1957 , nice doing business with you. Blue steering wheel looks good

Awesome info. Thanks

Do you have a link to an example of that compression fitting ?

I just scoped it out, one of the grommets is single, the other is double and has a brake line going with the fuel line. I would have to basically redo that brake line (crimp a new fitting on) to get it inside a new grommet.

Looks great