71/73 Mustang Parts For Sale

[Bill Perkins]

I have a few 71-73 Mustang Parts for sale, look at the pictures and see if you need any of these parts for your project car
Items in pictures are as follows:
71-73 Mustang Center Console Glove Box w/Lid Arm Rest - OE - $65.00 plus shipping cost
71-73 Mustang Dash Instrument Panel Bezel - OE - $45.00 plus shipping cost
71-73 Mustang Console Ash Tray Door - OE - $45.00 plus shipping cost
71-72 Mustang RH & LH Park Light Lens - OE - $35.00 for the pair plus shipping cost
71-72 Mustang Standard Grille - OE, has a broken piece but is repairable - $75.00 plus shipping cost
71-73 Mustang Console Shifter Clock Bezel - OE - $60.00 plus shipping cost
71-73 Mustang Windshield Washer Bottle Reservoir, has a broken plastic mount but can be used - OE - $15.00 plus shipping cost
71-73 Mustang Front Bumper Tag Bracket - OE - $15.00 plus shipping cost
71-73 Mustang RH & LH Rear Marker Lamp Light Bezel - OE - $25.00 for the pair plus shipping cost
71-73 Mustang RH & LH Front Marker Lamp Light Bezel - OE - $25.00 for the pair plus shipping cost
71-73 Mustang RH & LH Grille Headlight Outer Trim Molding Bezel - OE - $40.00 for the pair plus shipping cost
71-72 Mustang RH & LH Front Grille Lamp Light - OE - $20.00 each plus shipping cost
71-73 Mustang Passenger Bucket Seat Back w/ Automatic Seat Back Release Solenoid & Wiring - OE - $100.00 plus shipping cost
71-73 Mustang (4) Rear Wheel Opening Moldings & (2) Front Wheel Opening Moldings, Driver quality, small scratches & a few small dings - OE - $75.00 Sell all (6) as a Lot plus shipping cost
71-73 Mustang Rear Seat Bottom Frame & Foam - OE - $50.00 plus shipping cost
71-73 Mustang RH & LH Rocker Panel Moldings - OE - Driver quality, small scratches & a few small dings, couple drilled holes, $50.00 for the pair plus shipping cost
71-73 Mustang Standard Shifter Bezel Ashtray - OE - $35.00 plus shipping cost
71-73 Mustang Brown two spoke steering wheel - OE - both will need to be restored, $50.00 each plus shipping cost
71-73 Mustang Standard Tail Light Panel - OE - both will need to be repainted, $50.00 each plus shipping cost
71-73 Mustang RH Roof Drip Rail Channels (2) Pieces, Mach 1, Sportroof - OE - a few small scratches, $75.00 both pieces plus shipping cost
71-72 Mustang Turn Signal Assembly Brackets that can be welded to the Front Valance Panel, (2) sets RH & LH - OE - $25.00 per set plus shipping cost
71-72 Mustang Complete Turn Signal Assembly, Refurbished, (2) Pieces RH & LH - OE - $70.00 both pieces plus shipping cost
73 Mustang Front Grille Assembly, aftermarket, Little Dusty but in great shape, $115.00 plus shipping cost
73 Mustang Front Grille Parking Light Housing RH - OE - $25.00 plus shipping cost
71-73 Mustang Complete Hood Latch Assembly - OE - $50.00 plus shipping cost
71-73 Mustang Hood Hinges - OE - (2) Sets, one set has the springs and one set doesn't have the springs, $40.00 for set with springs and $25.00 for set without the springs plus shiping cost
71-73 Mustang Automatic Floor Shifter Bezel has a one inch very small crack but is very usable - OEM - $15.00 plus shipping cost
NOTE: All Prices for Parts are at Best Offer/Make Offer, Help me to clean out these parts from my garage!

Attachments​

• 
  IMG_6019.JPG
  3.7 MB · Views: 34
• 
  IMG_6020.JPG
  3.9 MB · Views: 32
• 
  IMG_6021.JPG
  3.7 MB · Views: 27
• 
  IMG_6022.JPG
  3.6 MB · Views: 26
• 
  IMG_6023.JPG
  3.5 MB · Views: 25
• 
  IMG_6024.JPG
  3.4 MB · Views: 24
• 
  IMG_6025.JPG
  3.5 MB · Views: 24
• 
  IMG_6026.JPG
  3.6 MB · Views: 25
• 
  IMG_6027.JPG
  3.5 MB · Views: 26
• 
  IMG_6028.JPG
  3 MB · Views: 25
• 
  IMG_6029.JPG
  3 MB · Views: 26
• 
  IMG_6030.JPG
  3 MB · Views: 25
• 
  IMG_6031.JPG
  3 MB · Views: 27
• 
  IMG_6032.JPG
  3.1 MB · Views: 25
• 
  IMG_6033.JPG
  3.1 MB · Views: 24
• 
  IMG_6034.JPG
  3.1 MB · Views: 22
• 

 

[Bill Perkins]

I have a few 71-73 Mustang Parts for sale, look at the pictures and see if you need any of these parts for your project car
Items in pictures are as follows:
71-73 Mustang Center Console Glove Box w/Lid Arm Rest - OE - $65.00 plus shipping cost
71-73 Mustang Dash Instrument Panel Bezel - OE - $45.00 plus shipping cost
71-73 Mustang Console Ash Tray Door - OE - $45.00 plus shipping cost
71-72 Mustang RH & LH Park Light Lens - OE - $35.00 for the pair plus shipping cost
71-72 Mustang Standard Grille - OE, has a broken piece but is repairable - $75.00 plus shipping cost
71-73 Mustang Console Shifter Clock Bezel - OE - $60.00 plus shipping cost
71-73 Mustang Windshield Washer Bottle Reservoir, has a broken plastic mount but can be used - OE - $15.00 plus shipping cost
71-73 Mustang Front Bumper Tag Bracket - OE - $15.00 plus shipping cost - SOLD
71-73 Mustang RH & LH Rear Marker Lamp Light Bezel - OE - $25.00 for the pair plus shipping cost
71-73 Mustang RH & LH Front Marker Lamp Light Bezel - OE - $25.00 for the pair plus shipping cost
71-73 Mustang RH & LH Grille Headlight Outer Trim Molding Bezel - OE - $40.00 for the pair plus shipping cost
71-72 Mustang RH & LH Front Grille Lamp Light - OE - $20.00 each plus shipping cost
71-73 Mustang Passenger Bucket Seat Back w/ Automatic Seat Back Release Solenoid & Wiring - OE - $100.00 plus shipping cost
71-73 Mustang (4) Rear Wheel Opening Moldings & (2) Front Wheel Opening Moldings, Driver quality, small scratches & a few small dings - OE - $75.00 Sell all (6) as a Lot plus shipping cost - SOLD
71-73 Mustang Rear Seat Bottom Frame & Foam - OE - $50.00 plus shipping cost
71-73 Mustang RH & LH Rocker Panel Moldings - OE - Driver quality, small scratches & a few small dings, couple drilled holes, $50.00 for the pair plus shipping cost
71-73 Mustang Standard Shifter Bezel Ashtray - OE - $35.00 plus shipping cost
71-73 Mustang (2) Brown two spoke steering wheel - OE - both will need to be restored, $50.00 each plus shipping cost
71-73 Mustang Standard Taillight Panel - OE - both will need to be repainted, $50.00 each plus shipping cost
71-73 Mustang RH Roof Drip Rail Channels (2) Pieces, Mach 1, Sportroof - OE - a few small scratches, $75.00 both pieces plus shipping cost - SOLD
71-72 Mustang Turn Signal Assembly Brackets that can be welded to the Front Valance Panel, (2) sets RH & LH - OE - $25.00 per set plus shipping cost
71-72 Mustang Complete Turn Signal Assembly, Refurbished, (2) Pieces RH & LH - OE - $70.00 both pieces plus shipping cost - SOLD
73 Mustang Front Grille Assembly, aftermarket, Little Dusty but in great shape, $115.00 plus shipping cost
73 Mustang Front Grille Parking Light Housing RH - OE - $25.00 plus shipping cost
71-73 Mustang Complete Hood Latch Assembly - OE - $50.00 plus shipping cost - SOLD
71-73 Mustang Hood Hinges - OE - (2) Sets, one set has the springs, and one set doesn't have the springs, $40.00 for set with springs and $25.00 for set without the springs plus shipping cost
71-73 Mustang Automatic Floor Shifter Bezel has a one inch very small crack but is very usable - OEM - $15.00 plus shipping cost - SOLD
NOTE: All Prices for Parts are at Best Offer/Make Offer, help me to clean out these parts from my garage!

Attachments​

• 
  IMG_6019.JPG
  3.7 MB · Views: 34
• 
  IMG_6020.JPG
  3.9 MB · Views: 32
• 
  IMG_6021.JPG
  3.7 MB · Views: 27
• 
  IMG_6022.JPG
  3.6 MB · Views: 26
• 
  IMG_6023.JPG
  3.5 MB · Views: 25
• 
  IMG_6024.JPG
  3.4 MB · Views: 24
• 
  IMG_6025.JPG
  3.5 MB · Views: 24
• 
  IMG_6026.JPG
  3.6 MB · Views: 25
• 
  IMG_6027.JPG
  3.5 MB · Views: 26
• 
  IMG_6028.JPG
  3 MB · Views: 25
• 
  IMG_6029.JPG
  3 MB · Views: 26
• 
  IMG_6030.JPG
  3 MB · Views: 25
• 
  IMG_6031.JPG
  3 MB · Views: 27
• 
  IMG_6032.JPG
  3.1 MB · Views: 25
• 
  IMG_6033.JPG
  3.1 MB · Views: 24
• 
  IMG_6034.JPG
  3.1 MB · Views: 22
• 

 

[fordmanted]

Sorry I've been away restoring earlier 64/66 mustangs, fox bodies, and some AMC 4WD cars and doing car shows plus judging vehicles. Just returned from SAAC 47th Indy event where we raced a 68 GT500 KR clone Mustang with 2008 supercharged Cobra engine-6 spd-3.73 Cobra IRS suspension in June 15/19 at Indy Raceway. There were four days of racing with SAAC and SVRA. Car built by adopted son, Kevin Casey, and it got a lot of attention plus it handled great. Our rented B4 garage was 3 doors down from Ken Miles#98 GT350R Shelby (sold for over 3 mil) where we got to sit in it plus repair clutch Z bar that cracked. Got welded and car was in car show. Drove my rare 1989 Shelby Dodge Dakota red truck #1042 out of 1500 made on Indy track for two days also.
We won two trophies in Sat. car show and made it home safely.
Have following parts for all Cleveland owners:
351C 4 bolt short block in std. form for $1200
May be able to supply 351C 4 bolt block only with rods $850
Fresh rebuilt 351C 4V close chamber heads ready to install $2400 or OBO
351C 4V close chamber heads in stock shape for $1400 pair
Stock 351C R/arms -Push rods in GC shape-cheap
Can furnish 351C 4V aluminum intake $295
Rare Boss 429 brand new hood with large open hole for Boss 429 hood scoop. $895
Note -man in Nederland's has original scoop for $3000
Can build or furnish all high perf. parts to build "K" code or Shelby engine with correct and HP parts. Took years to find NOS smog heads C7ZE/C8ZE cast plus smog cast Hipo exh. manifolds C7ZE Goes with 1" aligned bored 030 block with TRW 2249-030 pistons and 3/8 reworked rods. larger S/S valves with hardened total v/train and GC original t/cover and all HP parts. No JUNK or getbys. Can furnish as kit or total rebuild on our time.
Can build one Boss 302 engine with correct long stud heads with FMS stud seal rare v/covers plus turned and rebuilt Boss parts . Have D1ZE block , D1ZE 4v aluminum factory intake that FoMoCo was going to build 71 Boss 302 but changed directions-built 71 B351C instead. Would make a rare combination.
Serious inquiries only. No dreamers or tire kickers. Been doing this for over 65 years and still do . Judge and show cars plus buy, sell and horse trade some. It still happens every once and a while. Got over 60 years of stored stuff and down sizing due to 81 age . Still able since good LORD has saved me and my life. HE gets 10% and I get the same. THANK YOU JESUS!!
Specialize in 64/66 Mustang stuff plus all hot rod stuff too. Have 3/4 9" rear ends plus one disc brake 9" rear for $695. Have expensive Nascar 9" rear end gear sets for $195 (cost over $500 or more). some GC 9" gear setups with 28 spline axles from $695 with or w/o lockers. Have some good engine cores still.
Visit my Ebay storefordmanted2b2b, my Bonanza storeFORDMANTEDE and my CL/Madison for Ford auto parts. Thanks. Stay healthy; take care and God Bless

 

[Bill Perkins]

Sorry I've been away restoring earlier 64/66 mustangs, fox bodies, and some AMC 4WD cars and doing car shows plus judging vehicles. Just returned from SAAC 47th Indy event where we raced a 68 GT500 KR clone Mustang with 2008 supercharged Cobra engine-6 spd-3.73 Cobra IRS suspension in June 15/19 at Indy Raceway. There were four days of racing with SAAC and SVRA. Car built by adopted son, Kevin Casey, and it got a lot of attention plus it handled great. Our rented B4 garage was 3 doors down from Ken Miles#98 GT350R Shelby (sold for over 3 mil) where we got to sit in it plus repair clutch Z bar that cracked. Got welded and car was in car show. Drove my rare 1989 Shelby Dodge Dakota red truck #1042 out of 1500 made on Indy track for two days also.
We won two trophies in Sat. car show and made it home safely.
Have following parts for all Cleveland owners:
351C 4 bolt short block in std. form for $1200
May be able to supply 351C 4 bolt block only with rods $850
Fresh rebuilt 351C 4V close chamber heads ready to install $2400 or OBO
351C 4V close chamber heads in stock shape for $1400 pair
Stock 351C R/arms -Push rods in GC shape-cheap
Can furnish 351C 4V aluminum intake $295
Rare Boss 429 brand new hood with large open hole for Boss 429 hood scoop. $895
Note -man in Nederland's has original scoop for $3000
Can build or furnish all high perf. parts to build "K" code or Shelby engine with correct and HP parts. Took years to find NOS smog heads C7ZE/C8ZE cast plus smog cast Hipo exh. manifolds C7ZE Goes with 1" aligned bored 030 block with TRW 2249-030 pistons and 3/8 reworked rods. larger S/S valves with hardened total v/train and GC original t/cover and all HP parts. No JUNK or getbys. Can furnish as kit or total rebuild on our time.
Can build one Boss 302 engine with correct long stud heads with FMS stud seal rare v/covers plus turned and rebuilt Boss parts . Have D1ZE block , D1ZE 4v aluminum factory intake that FoMoCo was going to build 71 Boss 302 but changed directions-built 71 B351C instead. Would make a rare combination.
Serious inquiries only. No dreamers or tire kickers. Been doing this for over 65 years and still do . Judge and show cars plus buy, sell and horse trade some. It still happens every once and a while. Got over 60 years of stored stuff and down sizing due to 81 age . Still able since good LORD has saved me and my life. HE gets 10% and I get the same. THANK YOU JESUS!!
Specialize in 64/66 Mustang stuff plus all hot rod stuff too. Have 3/4 9" rear ends plus one disc brake 9" rear for $695. Have expensive Nascar 9" rear end gear sets for $195 (cost over $500 or more). some GC 9" gear setups with 28 spline axles from $695 with or w/o lockers. Have some good engine cores still.
Visit my Ebay storefordmanted2b2b, my Bonanza storeFORDMANTEDE and my CL/Madison for Ford auto parts. Thanks. Stay healthy; take care and God Bless

Do you have a good Ford factory rear view mirror for a 71-73 Mustang and a Telescopic Antenna for a 71-72 Mustang?

 

[Billw69]

Good evening,
I’m looking for a 351C block, DOAE or DIAE castings. Please let me know what your block availability might be.
Thank you,
Bill

 

[Billw69]

Also searching for a 15x7 magnum 500 rim or a pair if you have any.
Thank you,
Bill