Parts Wanted Fold Down Seat Latch Trap Door Handle

[Rickmustang]

I need one handle that goes into the latch for the trap door. It has a loop in it. There are two, one on each side, attached to the trap door in the trunk. Thanks.

 

[Steve73QMach1]

I have two Mach 1’s and both were missing the latch pulls for the trap door. I was unable to find replacements so I made my own. Here’s the thread from back then and includes what others have done. Hope this helps.
https://7173mustangs.com/threads/1971-mach-1-trap-door-latch-pins.41856/#post-420674

 

[351c1971]

I have two Mach 1’s and both were missing the latch pulls for the trap door. I was unable to find replacements so I made my own. Here’s the thread from back then and includes what others have done. Hope this helps.
https://7173mustangs.com/threads/1971-mach-1-trap-door-latch-pins.41856/#post-420674

Many years ago, I bent 3/16 inch stainless steel rod to make new latch pulls. If I remember correctly, they were held in place by Allen set screws. Unfortunately that Mach1 is long gone.