• If you have bought, sold or gained information from our Classifieds, please donate to 7173 Mustangs.com and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

instrument bezels

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Topless73Qcode4SPD

Well-known member
Joined
Jun 29, 2011
Messages
48
Reaction score
43
Location
California
My Car
73 Qcode 4SPD Convertible
Hello All,

I have recently refurbished my interior.

I have a Tach and MPH gauge. I was able to find a new replacement

plexiglass bezel for it.

I also have the gauge pkg which includes separate oil/temp and ALT

gauges with separate plexi bezels. These I am unable to find replacements

for. The original plexi is yellowed out from the instrument coils ozone.

I was able to clean them up a bit but are still not nice and clear.

Anyone know where I can find replacement bezels?

Let me know.

Tx

Topless73Qcode4SPD

 
Yeah..Iv'e tried the cleaning method.

It's an improvement but not as clear and bright as new.

I also repainted the needles so that helped as well.

Hopefully someone will come out with a replacement soon.

Tx

73Topless

 
Hello All,

I have recently refurbished my interior.

I have a Tach and MPH gauge. I was able to find a new replacement

plexiglass bezel for it.

I also have the gauge pkg which includes separate oil/temp and ALT

gauges with separate plexi bezels. These I am unable to find replacements

for. The original plexi is yellowed out from the instrument coils ozone.

I was able to clean them up a bit but are still not nice and clear.

Anyone know where I can find replacement bezels?

Let me know.

Tx

Topless73Qcode4SPD
Just replaced the interior dash components of my '71 Grande and the tach/speedo lens is easy to find, fortunately I did not need the instument cluster lens. You might email Don at OMS (a vendor here) and ask if he has any.

mike

 
Yeah..Iv'e tried the cleaning method.

It's an improvement but not as clear and bright as new.

I also repainted the needles so that helped as well.

Hopefully someone will come out with a replacement soon.

Tx

73Topless
I've had good success with a 3M product called "Finesse-it Finishing compound". Use a microfiber cloth and work it by hand. Chuck

 
Back
Top