I am interested in buying a good used original LH rear window molding. Anyone have one for sale?
-
If you have bought, sold or gained information from our Classifieds, please donate to 7173 Mustangs.com and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Parts Wanted Need LH rear window trim (molding) for 71 fastback
- Thread starter 71stroker
- Start date
Help Support 7173Mustangs.com:
- Joined
- Jul 14, 2010
- Messages
- 385
- Reaction score
- 307
- Location
- Southern Maryland
- My Car
- 73 Mach 1 (x3) 73 Grande
68 Coupe
72 Sprint Fastback
72 Sprint convertible, 1 of 50 (sold)
69 GT 500 (sold)
68 Fastback deluxe int. w/bench (sold)
The big "L" shaped side/top or bottom short trim?
Yes the big "L"shaped side/top piece for the driver's (LH) side.
Last edited:
- Joined
- Jan 20, 2022
- Messages
- 1,511
- Reaction score
- 2,464
- Location
- Homer Glen, Il
- My Car
- 1971 Mustang Mach 1 351c M-code FMX trans and 9 inch rear end
I do have one I will need to dig it out to see what the condition of it is. I will look tomorrow and let you know if it is any good.
- Joined
- Jul 14, 2010
- Messages
- 385
- Reaction score
- 307
- Location
- Southern Maryland
- My Car
- 73 Mach 1 (x3) 73 Grande
68 Coupe
72 Sprint Fastback
72 Sprint convertible, 1 of 50 (sold)
69 GT 500 (sold)
68 Fastback deluxe int. w/bench (sold)
I only have a bottom...
- Joined
- Jan 20, 2022
- Messages
- 1,511
- Reaction score
- 2,464
- Location
- Homer Glen, Il
- My Car
- 1971 Mustang Mach 1 351c M-code FMX trans and 9 inch rear end
I found the molding, it is not perfect it has a ding toward the bottom and some paint on the edge near the corner. My car came with two sets and this one looks like it may have been one of the originals from my car. I guess, I must have decided the other one was better condition, for some reason.
I used the original one from my car with the grabber blue paint on the right side. It wasn't great but the other passenger side one was really rough. The drivers side molding is pretty good though. I took pics of the driver's side molding, you can see the condition of it, notice the ding toward the bottom and the blue paint on the edge. It also has some sort of sealer inside the molding that would need to be cleaned out. It looks like the previous owner of my car must have tried to goop up the rear window to try and fix the leak.
I used the original one from my car with the grabber blue paint on the right side. It wasn't great but the other passenger side one was really rough. The drivers side molding is pretty good though. I took pics of the driver's side molding, you can see the condition of it, notice the ding toward the bottom and the blue paint on the edge. It also has some sort of sealer inside the molding that would need to be cleaned out. It looks like the previous owner of my car must have tried to goop up the rear window to try and fix the leak.
Attachments
Thank you for checking.
I'm okay with the paint and small ding as long as it will catch all the clips. Do you think it will be hard to remove the sealer used on the underside. Can you shoot a picture of the underside?
