• If you have bought, sold or gained information from our Classifieds, please donate to 7173 Mustangs.com and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Shelby 351C intake for Dominator carb #351D-9424-D

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MotoArts

Well-known member
Joined
May 30, 2011
Messages
937
Reaction score
6
Location
Pittsburgh, PA
My Car
'71 Sportsroof
'90 Mustang 7-Up 5.0 ragtop (sold after 20 years)
'66 Sunbeam Tiger Mk.IA
Bead blasted. Looks like the top side has been spray bomb clearcoated. Carb pad and divider have been "milled". Threads are in nice shape. No cracks or previous repairs that I see. Intake was on an engine that had been stored for many years indoors, but unknowingly had water in it. The bottom of the plenum, top of divider, bottom of plenum (where a heat shield would normally be on a small block) and several minor areas on the intake/head runners had corrosion as shown in the pics. I don't think any of it will affect performance, but you be the judge.




$500 shipped in the lower 48 states.

Would be interested in swapping for the 4160 Holley version, or the 351W version.

ShelbyIntake003.jpg


.

ShelbyIntake005.jpg


.

ShelbyIntake004.jpg


.

ShelbyIntake008.jpg


Thanks,


Pete



motoarts att yahooo dawt kawm



Located in the Pittsburgh, PA area


 
Back
Top