71_Stang
Well-known member
Well, I just went on a spending spree (with the wife's consent...well until she sees how much i spent ) with my tax return. I'm curious if anyone else used their tax returns for mustang gear? If so, list it!
I'll start...
To finish up my engine bay project:
1) Summit Racing LVLP spray gun - I have a 2hp shop compressor and it doesn't put out enough CFM for a HVLP (high volume low pressure) gun. The LVLP only uses 3 CFM at 30 psi and is great for primer.
2) Summit Racing Epoxy Primer & harder - I've done a lot of metal work to my firewall and overall engine compartment, and it's FINALLY time to cover up that bare metal with some primer.
3) body working supplies - filler, sand paper, stripper, respirator, etc.
4) New air tools! Body saw and mini grinder/cut-off wheel tool (forgot the actual name!)
To finish rebuilding/upgrading my front suspension:
1) 1" drop CJ pony parts coil springs.
2) Stock replacement coil spring saddles (still mulling over buying the daze DIY roller kit and converting these to roller :s)
3) Swaybar end links/bushings & paint for factory swaybar.
4) new wheel bearings, seals, races...
5) Camber kit from Open Tracker Racing
I'll start...
To finish up my engine bay project:
1) Summit Racing LVLP spray gun - I have a 2hp shop compressor and it doesn't put out enough CFM for a HVLP (high volume low pressure) gun. The LVLP only uses 3 CFM at 30 psi and is great for primer.
2) Summit Racing Epoxy Primer & harder - I've done a lot of metal work to my firewall and overall engine compartment, and it's FINALLY time to cover up that bare metal with some primer.
3) body working supplies - filler, sand paper, stripper, respirator, etc.
4) New air tools! Body saw and mini grinder/cut-off wheel tool (forgot the actual name!)
To finish rebuilding/upgrading my front suspension:
1) 1" drop CJ pony parts coil springs.
2) Stock replacement coil spring saddles (still mulling over buying the daze DIY roller kit and converting these to roller :s)
3) Swaybar end links/bushings & paint for factory swaybar.
4) new wheel bearings, seals, races...
5) Camber kit from Open Tracker Racing