When I purchased my 73 someone had added a ground wire tapped into the ground running to the printed circuit board. When I removed the added wire I lost my dash lights.
I traced the ground to the iginiton switch where I found one of the studs broken off that holds the igniton switch onto the...
The bolt with the nut works great,but install pump on the car and put the belt on it. only install the pulley just far enought for the belt to line up . If you don't do it this way you might put it in ltoo far and will have to remove it again.
There is a ground that attaches to the igniton switch . that is for the dash lights. on my 73 someone had broken a bolt off that holds the swich on and lost everything to the cluster.
Welcome from Virginia Randy
I have a cousin that lives in Lynhaven and I get down that way ever now and than.
I will be in Foley Ala in March for two weeks.
The problem I see with a moble home furnace is that the return air is in the front of the furnace. If you have a celing in the garage you will have to duct the retun air to it from the floor area.
cold air stays on the floor hot air rises. with the furnace in the celing your hot air will...
Can anyone tell me how hard it is to remove the POA valve from my AC.
Classic air sent out a notice saying that when you convert from R12 to R134 you have to adjust the POA valve counterclockwise 1/4 turn.
The best I can tell it is near the firewall next to the evaporator.
I have a 73 Q code conv. and just spent the summer trying to get motor mount to work.
I have the clam shell type with the number 665 stamped on them. there is also one that has 663 stamped on them.
I first tried the open kind that is glued together two pieces of metal with rubber in the...