Steve McMahan

TSP - Make it into a paste and scrub it on. Rinse it off.

I’ll gladly post a photo and prices if I have something you need. I may try and lay everything out and take some photos to give...

Carb rebuild or carb swop is in order, OR could be your fuel filter need changing. Look for the simple things first. Fuel pump, clogged...

I know this is an old post, but I hate to leave things hanging. I wasn’t able to locate connectors for the vacuum solenoid unit. So, I...

Totally agree. Just wish I would have realized that a couple years ago. I have the new filter in up by the EFI for the time being. I'll...

WTG, a well earned recognition for a beautifully finished car.

Took the Rickster to a local car show today. The weather was beautiful - perfect for a car show. It wasn't a large show, but it's the...

Good choice from Rock Auto. I ran the chrome ones with the O ring gasket for years on my Model A and probably had to replace them every...

I'm still using the factory Ford water outlet on mine. Straightened it out, surfaced it true on a piece of 80 grit paper and used a...

My thinking all along has been, if it works on stock 1980’s Ford cars, it will likely be an improvement in ours. My fuel filter is the...

I’m using the factory Ford quick disconnects, mounted at the tank, and I’ve had no problems with it failing. No fuel flow issues either...

Hi To All, Just wanted to run through my recent standard grille makeover and maybe give some inspiration to other members. OVERVIEW...

This car was a dark grey when I purchased this car from my best friend from high school in 2009. My friend bought it back in 1982. So I...

Backed out he screws all 1/4 turn. Fired it up let warm up in high idle for a couple min and kicked it down and it kept running and...

I do the same as Cleveland Crush - adjust for highest vacuum and then richen 1/8 ~ 1/4 turn for a small RPM drop. It allows a slightly...