Search results

To get rid of the extremely annoying loud whining sound, I usually leave her at home. Hahahaha

The factory finish was never glossy. It would have come from the factory in a matte finish. Some guys prefer it to be glossy and some guys prefer it to be matte. If you decide to respray it in a matte finish be careful which products you use. It may come out looking chalky. If you go on the...

I've seen the stencil that you can buy from mustang vendors. Maybe you could use that? I was considering doing the same thing. Having a graphic shop do vinyl wrap from the same 3m black vinyl used for the side stripes. I was also planning on having them wrap my front and rear valances so they'll...

I have a couple of pieces in mind. The metal bumper reinforcement panel that fits between the front bumper and the radiator support. The other piece I could think of is the metal strap\bracket on the backside of the door panels that holds the door pulls. And one other piece I could think of...

You mention checking all your negative ground connections but what about your positive connections? It sounds like to me that either the positive cable is making contact with the chassis at the solenoid or it's making contact on the starter body. Sometimes when you tighten the nut on the starter...

I think I would as a precautionary measure. Put in support bars side to side and possibly front to back in the door area. Also make sure that the car is completely level. I think I would do one quarter panel at a time and one floor pan at a time that will help you with keeping the body strong...

Yes that is the one. And you are right it has a lot going for it. a lot of money wrapped up in that car but we all have a lot of money wrapped up into our cars. Most of us on here will never get back the money that we put into them. We do it because we love it. And the old saying goes, a car...

So a 1973 Mach 1 just came up on eBay for sale and has a buy it now price for $50,000. Don't get me wrong it's a beautiful car but it's not original, it has very basic standard interior with no options and it's an original H code car with no competition suspension. He claims it's a one of one...

Yeah should be fun. Tko 600 5 speed trans and a 9" 31 spline locker w 4.11 gears behind it in my 71 Mach 1.

This is why I would like that intake. Not to mention it fits under factory ram air. 351c engine build TFS CNC PowerPort 225cc Cleveland cylinder heads, p/n TFS-5161T004-C11 (72cc, ti retainers) production iron Cleveland block 4.030" bore 4.03" bore Probe forged dish top pistons (p/n...

Hey guys, looking around for a weiand Xcellerator single plane 2v intake for 351c. Part number is 7516. Can be filthy but no cracks or stripped threads. I know I can buy new but looking for one a little cheaper. Thanks!

If it were me, I would build up that area of the extension with epoxy or panel adhesive and "sand in" the body line from the fender. Sometimes while dealing with reproduction parts(especially body panels) you have to get a little creative to get your desired results. Good luck. Hope this helps.

It's the access panel to the flux capacitor ?

Borgeson makes a brand new unit for our cars. Quick ratio. $400. That's what I'm doing on mine.

Stock would be externally balanced, so you will need the 28 oz flywheel.

As long as you're not dumping the clutch at 5500 rpm, I think you are safe with what you have. If you just want peace of mind and you already have the transmission out, Ford racing sells a billet steel flywheel for about 200 bucks. Make sure you get the 28 oz imbalance flywheel unless...

Bell housings typically don't blow apart unless the flywheel and/or clutch gives up. Run a billet steel flywheel with arp bolts and a good clutch set and you'll be ok.

I just went through this with all of my lenses. I took them all in the kitchen and scrub them with mild dish soap and warm water with a scrub brush. Once they were dry, I then applied a plastic polish. I used Mcguires plastic polish but mothers makes some too. I did it by hand with a...

All very good points. I really wished ford continued producing the woodgrain insert in the long center consoles. I personally love the look. If anyone has one, I will pay $$$$$. Lol. I think 71 only had a "stamping indent" on the driver side trunk lid opening. On the body, not on the trunk lid.

I bought my rear stuff from quick performance. Great prices, great service, and quick shipping.