2 groove water pump pulley

[callmejim]

I am adding Vintage Air to my 71 mustang 302 and need a 2 groove water pump pulley.

Any help?

 

[Paul of MO]

I am adding Vintage Air to my 71 mustang 302 and need a 2 groove water pump pulley.

Any help?

My 71 302 has a extra grove on the crank and an idler pully on the bracket for the a/c.

I do not think that I have ever seen a 2 groove water pump pulley as it would cause the fan to be that much closer to the radiator.

Multi groove crank pulleys are pretty easy to find especially for a 302.

- Paul

 

[mdan575]

CVF Racing sells various billet grooved pullies. Upper and lower including the WP. Not sure what the various provisions were for because ford had so various setups over the years. But a properly made pulley with 2 grooves won't change fan position in the shroud. I know mine is the same with 2 groove on crank and one groove on WP.

 

[Jeff73Mach1]

I am using a pair of CVF pulleys on my Cleveland and needed about an 1/8 th inch spacer for the water pump pulley, but I don't have Power steering so my set up is a bit different. Vintage Air should have a pulley source for you