Parts For Sale 351C 2V Heat riser and shield

[California 72]

2 pc heat riser and shield for 361C 2V.
Very good condition, media blasted and fresh ultra-high temperature old Ford Blue paint.
It’s not quite excellent condition since there is a grinder scar on one of the bolt holes by the previous owners. I’m guessing when they replaced the motor a seized bolt needed to be removed. It can be seen in the first pic before paint had been applied.
Hole is intact on all sides necessary to function properly.

$125.00 plus shipping.

Edit: Paint has been properly cured at temperature and is heat and chemically resistant. This should provide a measure of confidence, although this statement is not a guarantee or warranty upon completion of sale but does follow the paint manufacturers (VHT) directions to provide that the item should retain its appearance if properly maintained and handled.

 

[California 72]

Below is a pic to show the scar from what looks to be a grinder. I personally can’t say how secure anyone sees this being but from being the current owner and understanding the engine was replaced by the original owner, prior to 2006, the part remained secure in the motor until I removed it. I also didn't wish to experiment with trying to re-weld the area given the metal is too thin for my level or lack of expertise.

Please know that since this pic was taken, the part has been packaged to protect it as well as ready it for storage or shipping, whatever happens to be the case.