- Joined
- Apr 19, 2011
- Messages
- 4,308
- Reaction score
- 64
- Location
- San Jose, CA
- My Car
- 1971 M-code Grande
Which end of this do I attach the vacuum source, or does it matter?
Also, the Ford manual says to check the bi-metal switch to see if the
bleed valve is seated, any ideas on how to do that? We are doing a
re-install of the original air cleaner and the switch is NOS as is the
heat riser tube I bought from Don of OMS.
mike
Also, the Ford manual says to check the bi-metal switch to see if the
bleed valve is seated, any ideas on how to do that? We are doing a
re-install of the original air cleaner and the switch is NOS as is the
heat riser tube I bought from Don of OMS.
mike