g-strandet
Member
- Joined
- May 30, 2017
- Messages
- 16
- Reaction score
- 0
- Location
- Germany
- My Car
- 1971 Covertible with 351C 2V
I have bought a quite cheap 351C 4V from 1973 and now I started to break down the Engine and reduild it.
For this I wanted to use my 600cfm Summit carburetor.
But I know that I'll need an appropriate carburetor bridge.
In addition to that I have planed to build in a another camshaft.
Everything else is still original and not needed to be changed.
I actually just want to have the car for everyday use and normal street driving. Its alright to have quite a bit power but there should still be torque.
Therefore my question here is which suction bridge and camshaft can you recommend?
For this I wanted to use my 600cfm Summit carburetor.
But I know that I'll need an appropriate carburetor bridge.
In addition to that I have planed to build in a another camshaft.
Everything else is still original and not needed to be changed.
I actually just want to have the car for everyday use and normal street driving. Its alright to have quite a bit power but there should still be torque.
Therefore my question here is which suction bridge and camshaft can you recommend?
Last edited by a moderator: