crank spacer 19009-A341 for 351C stroker

[mycoses]

where can I buy the spacer 19009-A341 that has been discontinued by ford motorsports. spacer is used for installing a Cleveland timing chain set on a stroker crank w/ Windsor snout

 

[Jeff73Mach1]

I think you can find the part on ebay from time to time. Also some timing chain sets have the spacer incorporated into them-here is an example

http://rollmasterromac.carshopinc.com/product_info.php/products_id/124081/CS3130

You could also get a machinist to make one I imagine, if you could get the dimensions

 

[c9zx]

I don't know who made your crank. If it is SCAT this is a source. http://www.buydart.com/performance-style-timing-chain-sets-p-7151.html

Chuck

 

[Luke]

I seen 1 advertised with a eagle 393 kit on eBay Au yesterday. Sorry that i cant be more specific than for you maybe look up eagle they may have a parts list.

 

[mycoses]

I ordered the Scat TCS-351CP timing chain gear set with built in spacer but it had a couple of problems so I sent it back. The inside diameter of the crank gear was too small and would not fit over my Windsor snout on the stroker 351C crank. also the set had a custom thrust plate with special bearings but did not include the special screws needed to screw on the thrust plate to the block. seems to be some type of production irregularity which made an otherwise quality product useless to me.

 

[c9zx]

Have you contacted T Meyer? http://www.tmeyerinc.com or http://www.racecrateengines.com/mmeracing.html

Both do custom Cleveland builds.

Chuck