Door hinge mounting plate on pillar

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 13, 2016
Messages
90
Reaction score
6
Location
Michigan
My Car
71 Base 6 cylinder, and 72 Base 351C
Starting on my project! 72 Coupe, the previous owner "Tried" to put Lambo door hinges on it...

The bottom hinge has 1 bolt hole messed up that the bolts thread into that hold the hinge on, where they drilled it oversize. The top plate on the passenger side has 1 bolt broken off in it, and 1 hole drilled out oversize. The driver side top, the plate is gone, I don't know if it has dropped down, (If they can), or what. All that is there are the outer square holes, no plate to be seen.

Can they be changed, and if so, how? I am putting normal hinges on it.. As a side note, anyone want some Lambo hinges? lolol

They aren't made for a Mustang from what it looks like, they only had 1 bolt up top and 1 on the bottom. Not sure what they were thinking, lol. But I got the car thru an impound in California, and it is pretty solid, so I will fix this. Thanks for any suggestions! Earl

2017-11-07 19.31.56.jpg

2017-11-07 19.32.21.jpg

2017-11-07 19.33.15.jpg

IMG_20160913_1233559121.jpg

 
They lift up and out from the back side

I have a good set if you need them

email or PM me

 
Back
Top