Parts Wanted Fold Down Rear Seat Assembly

[71fastbackdrag]

I’m looking for a complete fold down rear seat assembly for my 73 Mach 1. Please call or text as I don’t have time right now to visit the forum everyday. Thanks, Mike Rowland in North Carolina 704-516-8033

 

[Doug's 73 Mach1]

I don't have a complete conversion package, but have many of the small parts needed, latches, chrome trim, hinges, etc.
You may already know this, but converting is a major undertaking requiring about 10 or so parts that come from the factory welded onto the chassis. So someone would have to remove all those parts without damaging them too badly. A few of them are in locations not very evident where to weld them into a car that didn't have the fold down seat to start with. The seat back hinge brackets and the seat back latch bracket being 3 of those. You also need to remove the welded in seat back support and package tray support in a car with the standard back seat as part of the conversion. Hope this is helpful.

Doug

 

[spdbk1]

Have 73 Mach 1az rust free car 351 2v car w matching block body ruff naca hood rare fold down rear seat at clean ca title in hand any interest 8500.00

 

[Motorcity Mustang]

I have a couple of fold down seats assemblies (including trap door). Also have side panels, one set without holes for speakers on the front panels, and some with speaker holes.

 

[teamxceed]

I have a couple of fold down seats assemblies (including trap door). Also have side panels, one set without holes for speakers on the front panels, and some with speaker holes.

How much for an assembly? And what colors do you have available?

 

[sr71kadena]

What panels do you have and what colors? What kind of pricing are you looking??

 

[Motorcity Mustang]

Let me get some pictures posted so you can see what I have currently.

 

[69 Rustang]

I was surprised that the fold down isn’t bolt in in the 71-73’s. I converted my ‘69 back in the day after sourcing every screw, bolt, latch and all the big parts from a wrecked fastback—that was easy. But once I bought my first Big Body car I realized it wouldn’t be as easy to do.

 

[Motorcity Mustang]

How much for an assembly? And what colors do you have available?

Here are pictures of what I have. Nothing has been cleaned up at this point, so you will see dirt on everything (haven't had the time to clean them). Here is what I have:

- 1 pr of rear panels - Blue, but have speaker holes in them
- 1 pr of 71 side panels - Blue
- 1 pr of 72/73 side panels - Blue
- 1 passenger side 72/73 side panel - Blue, but someone painted over it in black
- 2 pr of 72/73 side panels - Ginger, but very rough
- 6 rear seats - Upper - various colors
- 2 rear seats - Lowers - Blue
- 2 trap doors
- 3 fold down seat assemblies

 

[sr71kadena]

What are asking for on the Black console and on the dark fold downs?

 

[Motorcity Mustang]

What are asking for on the Black console and on the dark fold downs?

The black console is $375. The fold down seat assembly (includes the seats and trap door) is $700. The 71 side panels are $250, and the rears are $150 (they have the speaker holes). The 72/73 side panels are $200 (they are not as nice as the 71s)