MustangGuy2k
Active member
- Joined
- Nov 3, 2021
- Messages
- 38
- Reaction score
- 17
I looked all over for this and only found circuit coding and I really needed something that break it all out pin by pin. Now this is a standard cluster no bells and whistles, so if someone what's to expand on this your welcome. I'm doing an aftermarket harness (Painless) and things like this are left out of the install manual. Now I'm on the hunt a similar one for the ignition.
Standard Gauge Cluster Pinout
1= Blank
2= Blank
3= 2A - RH Turn Indicator
4= 3A LH Turn Indicator
5= 297C Ignition Feed (not sure what this one does)
6= 29 Fuel Gauge
7= Blank
8= Blank
9= 31 Oil Pressure Light
10= Blank
11= 977 Brake Warning Light
12= 39-39A - Temp Sender
13= 640 Warning Light Feeds
14= 57H Ground
15=Blank
16=Blank
17= 12 High Beam Indicator
18= 19 Instrument Panel Lamp Feed
Thanks,
Standard Gauge Cluster Pinout
1= Blank
2= Blank
3= 2A - RH Turn Indicator
4= 3A LH Turn Indicator
5= 297C Ignition Feed (not sure what this one does)
6= 29 Fuel Gauge
7= Blank
8= Blank
9= 31 Oil Pressure Light
10= Blank
11= 977 Brake Warning Light
12= 39-39A - Temp Sender
13= 640 Warning Light Feeds
14= 57H Ground
15=Blank
16=Blank
17= 12 High Beam Indicator
18= 19 Instrument Panel Lamp Feed
Thanks,
