Headers for 351C

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Milalynne

Active member
Joined
Aug 4, 2024
Messages
43
Reaction score
10
Location
Bedford Texas
My Car
1971 Mustang Mach 1 Yellow gold
Im looking at headers for my car. I am wondering what size would I need to get 1' 3/4 etc? I do not want to buy the wrong ones and have to ship them back. I know most of you have more experience than I do. I bought headers for the corvette I built and my 5.0 but it was straight forward with those two cars.
 
Well, It's a little modified, it has been rebuilt with top pistons, it has the Holley Brawler BR7302-1 2370 carburetor. Trick Flow aluminum heads ( I don't have the model number yet). Edelbrock RPM Airgap intake. MSD ignition, looks like stock exhaust manifolds. I am anting to get the headers and then ill have an H pipe built as I have done before at an exhaust shop I use. I don't know what mufflers it has. Keep in mind I just got in a couple of months ago and with my work schedule i have not had time to bring it from Dallas to Tulsa Oklahoma where my family's farm and large shop we build our personal cars in. I took these few months to purchase all new Ginger interior, I bought a 1 in front sway bar, .5 inch rear sway bar, Qa1 set of adjustable shocks, new bearing kit. as I am going to do road racing for fun. That is all the info I have and any guiding on the headers would be much appreciated.
 

Latest posts

Back
Top