70cobrascj Well-known member 7173 Mustang Supporter Member Joined Sep 27, 2022 Messages 438 Reaction score 326 Location Tennessee My Car Green on green 72 Mach 1 Sep 23, 2023 #1 Anyone which fitting the heater core valve is mounted on? Thanks
Hemikiller Well-known member Staff member 7173 Mustang Supporter Member Moderator Joined Jul 12, 2010 Messages 5,022 Reaction score 3,048 Location Killingworth, CT My Car 71 Mach 1 71 XR-7 hardtop 71 Country Squire 65 hardtop Sep 24, 2023 #2 The valve goes in the feed hose to the core, which is fed from the block outlet (351C) or intake manifold (302/351W/429). The feed in to the core is the upper RH tube on A/C cars. For non-AC heater only cars, Ford doesn't seem to care, as it's shown both ways.
The valve goes in the feed hose to the core, which is fed from the block outlet (351C) or intake manifold (302/351W/429). The feed in to the core is the upper RH tube on A/C cars. For non-AC heater only cars, Ford doesn't seem to care, as it's shown both ways.
70cobrascj Well-known member 7173 Mustang Supporter Member Joined Sep 27, 2022 Messages 438 Reaction score 326 Location Tennessee My Car Green on green 72 Mach 1 Sep 24, 2023 #3 Thanks again!
Steve McMahan Well-known member 7173 Mustang Supporter Member Joined May 19, 2021 Messages 1,370 Reaction score 965 Location Fort Mohave, AZ & So Cal (Upland) My Car 73 Grande will undergo three phase build process. Phase 1 is complete (driver). Phase 2 is interior/exterior restoration. Phase 3 is ++ performance. Sep 24, 2023 #4