Help Identifying Wiring Harnesses?

[detritusmaximus]

Got some wiring harnesses recently. Seems to be 73. Main harness, dash harness, power quarter window harnesses, two taillight harnesses. There is a second main harness, but it is unwrapped and hard to lay out. Plus a couple unknown bits of wiring.
Neither harness is for a tach dash.

See pics:

 

[detritusmaximus]

 

[detritusmaximus]

No one?

 

[MikeGriese]

Look for purple part number tags. Anything with a D3 is a 73 part. D2 is 72, D1 is 71. If they all came from the same car, you likely need only one tag to establish the vintage.

 

[detritusmaximus]

Look for purple part number tags. Anything with a D3 is a 73 part. D2 is 72, D1 is 71. If they all came from the same car, you likely need only one tag to establish the vintage.

Only some tags and numbers. I think it is almost all 73. And presumably Mustang. I have what appear to be two rear power quarter window harnesses. Two main harnesses, one unwrapped. Some tailight harnesses. But some of it I can only speculate. Like the two harnesses with the long rubber blocks on them. Obviously some sort of anti abrasion protection but for where? Or what?...maybe not even Mustang?
Possibly a rear defroster wire. Heavy gauge grey/yellow with a single angled female spade terminal.

 

[Moderator73]

The one harness with the long rubber block is harness 14B695 which is for the automatic seat back latch solenoid/relay, seat sensor switch and seat belt retractor switches. The one you have pictured is the left hand side. If you have another similar one (don't see a picture above) with the distinctive rubber block protector that would be the right hand side and that harness is 14B724.

FYI...according to the wiring diagram, one connector on harness 14B695 is not used on the mustang so it just ends under the driver's seat and isn't connected to anything. It's the connector with the three black/black yellow dot wires going into the double bullet connector.

Here's a picture (poor) of where that harness is located. I know it's hard to see so I attempted to highlight the left harness in yellow if it helps any.

Bob