mickmatt
Well-known member
- Joined
- Nov 2, 2010
- Messages
- 51
- Reaction score
- 0
- Location
- sussex england
- My Car
- 71 mach 1 302 c4 2nd owner i bought it in 92 and have managed to keep it on the road since then through thick and thin drove 1000 miles into france back in september nerver missed a beat and the fuel pump quite liked it as well!! keeping the faith and the throttle in cheers mickmatt
i have a 302 with edelbrock performer manifold and 600 holley question is can i chop out all that vacumn piping that goes to the tree at front of inlet manifold as i figure i only need vacumn to gearbox mod ulator (c4) and cannister on dizzie at the moment i have a vac port blocked off under carb can i use that for dizzie and like i say ditch the rest thanks for any info and best way to go cheers mickmatt