Inner fender splash shields

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rio1856

Drive it like you stole it!!!
7173 Mustang Supporter Member
Joined
Aug 21, 2011
Messages
540
Reaction score
513
Location
Immokalee Fl.
My Car
1972 Mach 1 Q code 351CJ 4Spd Toploader 9" rear end
I don't know if anyone else has posted this but here is a link to Kentucky Mustang, one of our vendors. They now offer new inner fender splash shields for our sleds made by ACP.

https://www.kentuckymustang.com/splash-shields-set-of-4-1971-1973-acp.html
Thanks Rio I am missing one of the shields at the cowl so I might just as well replace all 4. I have been inquiring at different used vendors and found none available. This forum is a great place to find parts and information.
 
Are there any pics or drawings about where these go or how they're installed? I'm missing I think all of these and have no idea how they are installed.

Thanks
 
The ones near the A pillar (rear) are easy. More or less press fit and secured with hex head sheet metal screws. The front ones require quite a bit of work as they go between the core support and the fender frame. I can't remember all the steps but, it was a real PITA because I was mad at myself for not realizing this before I had the fenders and the front end together. Chuck
 
Thanks Rio I am missing one of the shields at the cowl so I might just as well replace all 4. I have been inquiring at different used vendors and found none available. This forum is a great place to find parts and information.
I recently purchased a passenger rear one from Mike Berardi. He has them, you can contact him on here or Facebook. He is in the Detroit area but will ship for a reasonable price.
 
Does anyone know what the 3 bolts hold that surround the heater core tubes on the firewall
 

Attachments

  • 20240601_173611.jpg
    20240601_173611.jpg
    1.9 MB · Views: 0
Back
Top