Need gauge wiring harness

[dpoepperling]

I am looking for a gauge wiring harness for a 73 with gauges, tach, c6 auto.

See them on ebay for $59, but let me know if you have one lying around for cheaper or for trade for other parts.

[email protected]

 

[Tnfastbk]

I am looking for a gauge wiring harness for a 73 with gauges, tach, c6 auto.

See them on ebay for $59, but let me know if you have one lying around for cheaper or for trade for other parts.

[email protected]

That is way cheap in my opinion

 

[71steed]

I am looking for a gauge wiring harness for a 73 with gauges, tach, c6 auto.

See them on ebay for $59, but let me know if you have one lying around for cheaper or for trade for other parts.

[email protected]

Are you looking for the center gauge harness or the complete underdash harness?

 

[dpoepperling]

This is what I need. In fact, I mainly need the plugs and the wiring to the oil & temp sending units, a/c compressor, and I believe that is it. I am running an HEI distributor, so I don't need anything to go to the coil, etc. Honestly, if someone has the plugs with a little wire attached to them, I will make my own harness.

http://www.ebay.com/itm/1973-MUSTANG-351C-ENGINE-GAUGE-FEED-WIRING-HARNESS-AUTO-/350399255589?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item51956c5425


I suppose a 4 prong trailer plub would do it for the 4 prong, but not sure yet whether I need the 3 or the 4. I should be getting my wiring diagram book today, but does anyone know off-hand which wires go to what from the flat 4 and 3 prong plugs, as well as the single plug?