Painless wiring versus reality

[csdean007]

I have a 21 circuit Painless Wiring harness for my 72 fastback. The manual is so so and states that in most cases the wire colors match factory. But working with attaching the old turn signal switch to the harness but seems not to match up. The wires say what they are as far as function… but not sure if it really matches the plug. Anyone have what each wire represents on the original?

 

[midlife]

This starts at interior left when facing the pins, then goes to the right, then up and over to the left.

black/pink	158​	key buzzer reminder	C key buzzer
green	511​	stop lamp signal	stop lamp switch
green/white	3​	LF turn signal	KA3 B4
white/blue	2​	RF turn signal	KA2 B3
blue	1​	horn out	KD5
yellow/blue	460​	horn power	Fuse Box 11
white/red	365​	e-flasher	e-flasher
green/orange	9​	rear LH turn	J
orange/blue	5​	rear RH turn	F
blue	44​	flasher	flasher