Wanted motorcraft 2100 2 barrel

[Nige]

Hi All

i am having trouble with my motorcraft 2100 carb 2 barrel on 73 mach 1 351 cleveland

would anyone have a new carb you would sale.

Nige

 

[detritusmaximus]

Hi All

i am having trouble with my motorcraft 2100 carb 2 barrel on 73 mach 1 351 cleveland

would anyone have a new carb you would sale.

Nige

Pretty sure I have a Holley two barrel that needs a rebuild, if you want to go that route. I can get numbers later.

 

[Don C]

Have you tried to rebuild it? Do you know what the problem with it is?

 

[Nige]

Have you tried to rebuild it? Do you know what the problem with it is?

Hi Don C 

I used one of those carb rebuild kits runs great 40 mph and over , as soon as i drive at 30 mph in drive starts chugging unless you drive in 2nd automatic ,

as soon as you have to slow down or stop starts to get lumpy and cut out .

Have taken carb part twice to check .

Thanks Nige

 

[Don C]

It may not be the carburetor. It could be a vacuum leak or an ignition problem.

 

[stormy69]

i have the original carb from my 73 mach 1 with a 351w 2v. if its what you need let me know. $40 + shipping.

 

[Nige]

i have the original carb from my 73 mach 1 with a 351w 2v. if its what you need let me know. $40 + shipping.

Hi stormy69

Have you a picture please and was it running ok.

Nige

 

[3514boltstang]

i have the original carb from my 73 mach 1 with a 351w 2v. if its what you need let me know. $40 + shipping.

Hi stormy69

Have you a picture please and was it running ok.

Nige

I have an extra one you can have for shipping cost,It may fine to use as is as it ran fine a few months ago.

 

[Nige]

i have the original carb from my 73 mach 1 with a 351w 2v. if its what you need let me know. $40 + shipping.

Hi stormy69

Have you a picture please and was it running ok.

Nige

I have an extra one you can have for shipping cost,It may fine to use as is as it ran fine a few months ago.

Hi That would be very good of you . Nige