Hughes torque converter FMX

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
M

Mikes73

Well-known member
7173 Mustang Supporter Member
Joined
Jun 9, 2012
Messages
1,323
Reaction score
8
Location
oklahoma
My Car
1973 mustang sportsroof - 351c 2v - fmx trans.
Hello everyone, I have a quick question. Have any of you fine folks used a Hughes torque converter before? The one I am looking at has 2200-2500 rpm stall speed that sure should work well with my combo. Thanks.

 
Last edited by a moderator:
B and M and TCI make good converters.

You need to call the converter company and ask them what you should use . A2500 stall in a small block will have a different stall in a big block because of the torque so what the ads say the stall is does not apply to all engines.

 
Thanks for the reply. As far as I know Hughes is the only one that makes a converter for the FMX transmission.

 
Last edited by a moderator:

Similar threads

O
Parts Wanted CJ Torque Converter - FOUND!
Replies
10
Views
551
t.kohlmeyer
t.kohlmeyer
73 SGM Mach
C6 bolt diameter for torque converter and stall recommendation
Replies
15
Views
1K
Paul M
Paul M
andy72
351C IDLE SPEED PROBLEM, FMX CLUNK?
2
Replies
32
Views
3K
AcesArneson
AcesArneson
M
351C to 460 Swap - Opinions
Replies
15
Views
450
mwallace
M
J
Convert Auto to Manual
2
Replies
22
Views
2K
giantpune
G

Latest posts

Back
Top