Jump to content

Vacuum Booster Seal disintegrated


Recommended Posts

After removing the pedal support assembly and the brake pedal to expose the firewall, an inner plastic seal between the firewall and the vacuum booster was found to be disintegrated. See the photos below. Before I have to remove the vacuum booster and enter that mess, can someone tell me what this plastic component is and how to replace it?  I don't want to remove the vacuum booster if I don't need to.  I also found it was somewhat glued to the back of the rubber boot which covers the rod.

 

301x201https://i.ibb.co/WyLLvDg/IMG-20190517-144307653.jpg[/img]274x182https://i.ibb.co/wgDVVBd/IMG-20190517-144242199.jpg[/img]

 

Thanks

 

Link to comment
Share on other sites

What you're seeing is only a portion of the plastic "gasket", the rest is on the outside between the booster and outside of the firewall.

 

This has been discussed before

https://www.7173mustangs.com/thread-brake-booster-seal--34140?

 

 

“If you can't explain it simply, you don't understand it well enough.”

--Albert Einstein

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...