Bobby

Classic Auto Air makes a replacement plenum box. You’ll have to transfer the vacuum motors and brackets etc but it’s new and stout...

Stroke your 302 to 347 and customize your components and put throttle body EFI in it and you’ll be much satisfied with the results and...

Another Howdee Doo from Tejas! Nice Ride! Post more pics! Engine! We need an engine pic "auto"graphed by the engine! Interior pics...

I bought the same one for my Mach 1. Unfortunately it didn't fit at all and I had to return it. I was at the end of my web research on...

Howdee and welcome from Texas!

As I had mentioned in previous posts, I am also contemplating converting to a 4 speed toploader. One of the things I am having a...

I also added the long console. Mine is a C-4. Console went in with no fitment problem. I did "spread" the plastic at the front end to...

FWIW, We installed two center consoles, from ACP, in our 73 Mustang Convertible, and our 73 Mach 1. In some of the earlier comments in...

Tom....do you have a C4 tranny?.....or C6? I've been trying to find something on the net that give me a dimension of the shift link...

I would replace the all the fuel lines. The steel replacement lines are pre bent and not very expensive. As others have stated...

Howdee from League City TX! Nice rides....all of them! You lucked out with your HO Mustang for sure. Read an article about them from...

Wrangling with a non-stock exhaust system is always tricky. I would tell you to get some nice headers of your choice and go to a custom...

Mine did not come with any clamps...unfortunately. Thanks for the compliment. He's a head turner! I say he because my custom plates...

I installed a brass nipple and a 90 degree elbow in place of the plug for the TV pressure on my AOD Tranny. Then I installed a pressure...

I have the exact same collector/reservoir. I had to jury rig a clamp to secure it. Where did you get your clamp?