Bobby

Howdee partner! Welcome from League City Tx. Pics please!

Hello. I have recently acquired a '71 Mach 1 and have begun the restoration process. I'm looking forward to thoughts and support through...

Hi Mustang Gentlemen! I have some new to new-ish parts from my many adventures that….welll….didnt work out as planned. I have the...

Not saying that it does. Just speculation on what the machinist MIGHT have meant…..

My engine builder has taken upwards of 2+ years and only has the short block finished so far. Yep. the builder is me.

I wonder if the machine shop guy meant offsetting the ring gaps so they don’t line up.

Howdee and willkomen from Texas USA! I figured you meant in-line 6. A very very reliable engine!

You can get 600+HP with a more aggressive build but it will certainly co$t you. Realize that 600 hp in a 50year old car that was not...

With a moderate Comp Cams cam, i am pulling 475 HP and 476 lbs of torque. That was with the Edelbrock 1411, 750 cfm carb. Now running...

Once you finally got your engine together, what kind of power were you putting down? Are you glad you went with the 393 over a 408...

I ended up going to three different machine shops to get my build done and dyno’d. I acquired a 351c block in excellent condition and...

All the inner and outer tie rod ends and the idler arm have been replaced along with the lower control arms and all the ball joints...

With all this steering talk going on, I have a question. I had my steering column rebuilt in 2019. Also replaced the power steering...

I had a 1406 on my 72. Ran great until it didn’t. Bought a new one but not much better. After my stroker build, I purchased a 1411...

Last weekend I finally got the Holley Sniper and the Holley dual sync distributor up and running. Have been fighting back issues and...