Inner fender splash shields

I don't know if anyone else has posted this but here is a link to Kentucky Mustang, one of our vendors. They now offer new inner fender splash shields for our sleds made by ACP.

https://www.kentuckymustang.com/splash-shields-set-of-4-1971-1973-acp.html

rio1856 said:

I don't know if anyone else has posted this but here is a link to Kentucky Mustang, one of our vendors. They now offer new inner fender splash shields for our sleds made by ACP.

https://www.kentuckymustang.com/splash-shields-set-of-4-1971-1973-acp.html

Click to expand...

Thanks Rio I am missing one of the shields at the cowl so I might just as well replace all 4. I have been inquiring at different used vendors and found none available. This forum is a great place to find parts and information.

Are there any pics or drawings about where these go or how they're installed? I'm missing I think all of these and have no idea how they are installed.

Thanks

The ones near the A pillar (rear) are easy. More or less press fit and secured with hex head sheet metal screws. The front ones require quite a bit of work as they go between the core support and the fender frame. I can't remember all the steps but, it was a real PITA because I was mad at myself for not realizing this before I had the fenders and the front end together. Chuck

I think you could sneak the fronts in but the back would be difficult.

Thanks. I'll get the car up in the air this week and take a fresh look.

Bill Kanode said:

Thanks Rio I am missing one of the shields at the cowl so I might just as well replace all 4. I have been inquiring at different used vendors and found none available. This forum is a great place to find parts and information.

Click to expand...

I recently purchased a passenger rear one from Mike Berardi. He has them, you can contact him on here or Facebook. He is in the Detroit area but will ship for a reasonable price.

Does anyone know what the 3 bolts hold that surround the heater core tubes on the firewall

Aaron Wolfman said:

Does anyone know what the 3 bolts hold that surround the heater core tubes on the firewall

Click to expand...

The hvac box.