Want this Tool; Don't need this tool

Cleveland Crush · Aug 15, 2024

I'd really like to own this brake line tool. "Unfortunately" my current Craftsman brake line wrenches work just fine for as seldom as I use them

https://www.ebay.com/itm/3547252780...OrKR0cQQ-a&var=&widget_ver=artemis&media=COPY

tpj71mach · Aug 15, 2024

Those are pretty cool! Haha, I have drawers of tools I have no need for, that I have use twice every 10 years or so. When I managed the dealership Parts and Service departments, the damn Snap-On guy came every Tuesday morning to see the techs and stopped in my office to show me the latest greatest gadget. He knew I was a sucker for the cool stuff, I bought way too much of those flashy gimmicky tools.

Big Red Mach 1 · Aug 15, 2024

I have a lot of one-time or seldom used specialty tools. I figure if labor is $300 for someone else to do the job, and the tool is $150, I buy the tool, I save the other $150, gain the experience, and have an asset in the tool that I can one day re-sell if I never use it again vs. pissing away $300 for soemone else to do it.

Sheriff41 · Aug 15, 2024

Still using my old Proto flare nut wrenches from my days as a mechanic. Those look good, though.

will e · Aug 15, 2024

Those look pretty cool.

Big Red Mach 1 said:
I have a lot of one-time or seldom used specialty tools. I figure if labor is $300 for someone else to do the job, and the tool is $150, I buy the tool, I save the other $150, gain the experience, and have an asset in the tool that I can one day re-sell if I never use it again vs. pissing away $300 for soemone else to do it.

This is how I try to roll too. There are just certain times the correct tool keep a job at 10 minutes instead of 2 hours!

Cleveland Crush · Aug 15, 2024

Sheriff41 said:
Still using my old Proto flare nut wrenches from my days as a mechanic. Those look good, though.

Yep, my trusty vintage Cman flare wrenches contiue to serve me well also.

giantpune · Aug 15, 2024

Same here. I use flare wrenches and flare crows feet.
The tools linked look cool, but also look bulky. I could see having some trouble fitting that guy onto the back of a wheel cylinder or caliper due to clearance issues.

I have a similar issue with the fancy set of milwaukee floppy-headed ratcheting wrenches. They are very nice wrenches, but they are bulky. They do not fit in some spots that my other, more humble wrenches fit.

boilermaster · Aug 16, 2024

Fellas,
Really, 12 point flare nut wrench set, they will only cause you skinned knuckles and rounded off flare nuts.
Boilermaster

Cleveland Crush · Aug 16, 2024

boilermaster said:
Fellas,
Really, 12 point flare nut wrench set, they will only cause you skinned knuckles and rounded off flare nuts.
Boilermaster

Good "point" boilermaster!!

Hemikiller · Aug 16, 2024

Yeah, those seem like the size would be an issue for some jobs. They'd be really handy for assembly line type work, or the guys at the Toyota dealerships replacing frames...

tony-muscle · Aug 16, 2024

That looks like a dream. I have always wanted ratcheting open wrenches but never seen them before. Size may be an issue though. But how many times you have that tiny space to rotate the wrench where you go once, take the wrench off, flip it, then go a little bit, and repeat 100 times.
Also, depending on the tool quality, the number of ratcheting stops make a big difference.

will e · Aug 16, 2024

I wouldn't use them to break a nut free. Just in those tight spots when the nut isn't moving by hand. Of course an open end wrench can do the job, you just have to turn it over a few dozen times. But well all know that 'smart' feeling when you have a situation and you say 'hey, I have the tool for this'.

mjlan · Aug 21, 2024

I totally agree with whoever said "no 12pt wrench is going to break a brake line nut loose."

At least not the line nuts that I work on 99% of my time, the 12pt would just round them off...

Want this Tool; Don't need this tool

Help Support 7173Mustangs.com:

Cleveland Crush

Well-known member

tpj71mach

Well-known member

Big Red Mach 1

Well-known member

Sheriff41

Well-known member

will e

Well-known member

Cleveland Crush

Well-known member

giantpune

Well-known member

boilermaster

Well-known member

Cleveland Crush

Well-known member

Hemikiller

Well-known member

tony-muscle

Well-known member

will e

Well-known member

mjlan

Well-known member

Similar threads

Latest posts

Want this Tool; Don't need this tool

Help Support 7173Mustangs.com:

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!