’71 Mach 1 Resto Project

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Were ALL crazy about these old gals...... Love and look forward to the updates, info, and random stuff EVERY day! Just checked the forum TODAY (cuz I thought my steering wheel was upside down and I was right!) All good now and thanks to ALL for being so sharing and helpful
Cheers and carry on!!!
 
torbsim said:
What an incredible transformation. Wonderful!!!
Click to expand...
Thank you! What a long strange trip it's been, haha.

This was my first Ford full resto, and it was a learning experience, I built a lot of cars back in my teens and twenties, usually engine swap on one, paint job on another, sometimes both mechanical and body on one the same car. I never performed a full frame off restoration back then, I never had the budget or space to do it. As an adult, I have only done full frame off restorations on Chevy's. After taking a multiple decade break from restoring cars, raising four sons, building my business and paying bills, I have to admit I was spoiled by building these Camaro's and Chevelle's. By the time I reentered the hobby, everything, for those cars, was being made reproduction, often by multiple manufacturers so you can compare price and quality. I am confident that you could build a 69 Camaro completely out of a catalog, they make fricking everything for that car, haha. With our cars though, I learned if someone makes it they are probably the only one that does make it, so whatever the quality, it is the only one out there. I also had to figure out who the best supply houses for Mustang parts were, and who weren't so great (not wanting to name the not so great but their initials are CJPP, haha).

I found that I needed to remember how to do it like we did back in the day. I have to admit, I found it strangely more satisfying though. Hunting that needed part down gives a sense of accomplishment that ordering it from a supply house simply doesn't give you. Networking was the key back then, going to car shows and swap meets trying to meet the guy with the honey hole full of parts. Thankfully, in addition to all of our old school tricks, which are still invaluable, we now have the luxury of the internet with Craigslist and eBay.

Hats off to Idaho Chris for referring me to this forum, it has been a life saver. There have been so many helpful people that helped this yahoo from Chicago with mostly GM experience to not screw up a Mustang too badly. I appreciate all of the support, advise, tips, and parts assistance that I received from the members here as I travelled down this road. Thank you again for all of the advise and guidance that all of the members here have given, I really appreciate all of it.

My car is still not completed, ( I have a new piece of cardboard taped to the wall with a bunch more to-do's listed on it) but it is a driver and I am trying to drive the tires off of it before winter. All of my friends have put their cars away for the winter already, I helped a friend winterize his Vette yesterday and to my knowledge that was the last one to get tucked away for hibernation. I want to keep driving mine until the beginning of December. We usually don't get snow around here until after that, but once the snow hits the ground, in Illinois that means rock salt on the streets and that is when the party will be over for this year.:cry:

God willing, we will all be here digging them out in the spring and firing them up and performing our civic duty, trying to keep the streets maintained by repairing areas of the asphalt with rubber patches, wherever we can.🤪
 
Last edited:
tpj71mach said:
Thank you! What a long strange trip it's been, haha.

This was my first Ford full resto, and it was a learning experience, I built a lot of cars back in my teens and twenties, usually engine swap on one, paint job on another, sometimes both mechanical and body on one the same car. I never performed a full frame off restoration back then, I never had the budget or space to do it. As an adult, I have only done full frame off restorations on Chevy's. After taking a multiple decade break from restoring cars, raising four sons, building my business and paying bills, I have to admit I was spoiled by building these Camaro's and Chevelle's. By the time I reentered the hobby, everything, for those cars, was being made reproduction, often by multiple manufacturers so you can compare price and quality. I am confident that you could build a 69 Camaro completely out of a catalog, they make fricking everything for that car, haha. With our cars though, I learned if someone makes it they are probably the only one that does make it, so whatever the quality, it is the only one out there. I also had to figure out who the best supply houses for Mustang parts were, and who weren't so great (not wanting to name the not so great but their initials are CJPP, haha).

I found that I needed to remember how to do it like we did back in the day. I have to admit, I found it strangely more satisfying though. Hunting that needed part down gives a sense of accomplishment that ordering it from a supply house simply doesn't give you. Networking was the key back then, going to car shows and swap meets trying to meet the guy with the honey hole full of parts. Thankfully, in addition to all of our old school tricks, which are still invaluable, we now have the luxury of the internet with Craigslist and eBay.

Hats off to Idaho Chris for referring me to this forum, it has been a life saver. There have been so many helpful people that helped this yahoo from Chicago with mostly GM experience to not screw up a Mustang too badly. I appreciate all of the support, advise, tips, and parts assistance that I received from the members here as I travelled down this road. Thank you again for all of the advise and guidance that all of the members here have given, I really appreciate all of it.

My car is still not completed, ( I have a new piece of cardboard taped to the wall with a bunch more to-do's listed on it) but it is a driver and I am trying to drive the tires off of it before winter. All of my friends have put their cars away for the winter already, I helped a friend winterize his Vette yesterday and to my knowledge that was the last one to get tucked away for hibernation. I want to keep driving mine until the beginning of December. We usually don't get snow around here until after that, but once the snow hits the ground, in Illinois that means rock salt on the streets and that is when the party will be over for this year.:cry:

God willing, we will all be here digging them out in the spring and firing them up and performing our civic duty, trying to keep the streets maintained by repairing areas of the asphalt with rubber patches, wherever we can.🤪
Click to expand...
I know exactly what you mean, I'm also fully involved in the project: https://7173mustangs.com/threads/mustang-mach-1-1973-351c-v2-h-code.44836/.
 
Last edited:
Early on Monday morning, I drove up to Saginaw Mi. (about 4 1/2 hours from me) to pick up some door panels from new member EstateNancy. They replied to my classified ad looking for door panels because they are running an estate sale and have a bunch of 71-73 Mustang parts. My understanding is the actual sale is coming up soon, and that the family is keeping the cars but wanted to liquidate the collection of parts. I bought the two sets of deluxe door panels that they had and got a few other things that I needed to complete the build from them. Overall a long ride but well worth it. I bought a real nice set of a-pillar interior moldings in black. They were a gamble because I honestly could not tell if they were for a coupe or a fastback. I bought them because they were in such nice shape, luckily they are for a fastback and will fit my car, so no money wasted.😌

1730932032195.jpeg
1730932064065.jpeg
1730932106035.jpeg
 
Last edited:
I disassembled and thoroughly cleaned all of the components of the door panels. After that I reinstalled the nicest inserts, moldings and handle on the nicest panels and those will be the door panels I am installing in my car. The other two panels I will assemble with the remaining parts and might see if someone needs them maybe for a driver. They cleaned up pretty well so far, we will see how good they look when I am done with them, and if anyone wants them. The first set of panels that are for my Mustang came out pretty nicely, not at all perfect, but way better than the ones that came with the car, haha.

I ordered new ferrules for the lock knobs and retaining clips from NPD, so I plan to install the door panels on the car this weekend.🤞

Mach 1 1032.jpgMach 1 1033.jpgMach 1 1034.jpg

Of course, way better is pretty easy to achieve when the baseline is set as low as the condition of the original panels set it, LOL.

I had never seen a door panel so rough before these, the passenger side actually was split down the middle top to bottom.

The saddest part is the front was the "good side" the backing material had all but disintegrated on the original panels.☹️

Mach 1 (14).jpgMach 1 (15).jpg
 
Last edited:

Similar threads

California 72
1972 Convertible resto mod
2 3
Replies
40
Views
3K
California 72
California 72
daleran33
First Mustang! 1972 Sprint
Replies
13
Views
671
Bill Perkins
B
rybo
My 1973 Mach 1 Build
Replies
7
Views
327
rybo
rybo
ReBeLLangley
71 Mach 1, 429CJ-R Restoration
Replies
17
Views
2K
bkdunha
bkdunha
DanB
71 Mach 1 (non-tach) Wiring
Replies
1
Views
398
midlife
midlife

Latest posts

Back
Top