MeZapU
Well-known member
- Joined
- Feb 12, 2011
- Messages
- 830
- Reaction score
- 11
- Location
- Southery, UK
- My Car
- 12 GT
73 Mach 1
85 GT
66 F-100
I'm in the middle of my engine swap and am selling parts off of my old engine parts. Nothing wrong with them. Just making room for the new powerplant.
Hydraulic roller cam and retrofit kit: SOLD
Headers: SOLD
Valve Covers: SOLD
Roller Rockers: SOLD
Intake Manifold:
Weiand X-Cellerator 2V. Never cut on except for the little notch on the carb flange to clear the choke hardware on the Holley carb. The newest Weiand casting of this intake has a different shaped flange to alleviate that issue. Not like it's a big deal. All threads perfect. In extremely good condition. Was still low profile enough to run my Ram-Air air cleaner (barely). Picked up approx 30rwhp and 20 ft/lbs of torque with this intake vs an Edelbrock Performer 2v. No lack of streetability. I really liked this intake but it will not fit my new 4V headed engine. $140 plus shipping.
Driveshaft:
Stock driveshaft plus yoke and universals for a 351c with a 4-speed Toploader 71-73 application. 51" from hole-to-hole. Good shape, I'm just installing an aluminum driveshaft in my car. $100 plus shipping.
71-73 Exhaust Trumpets:
In really great shape. Good chrome. A rub mark from the spring shackle but nothing major. I upgraded to 2.5" exhaust and these will no longer fit. $75 plus shipping
Shortblock: SOLD
Let me know if you have any questions or concerns.
Hydraulic roller cam and retrofit kit: SOLD
Headers: SOLD
Valve Covers: SOLD
Roller Rockers: SOLD
Intake Manifold:
Weiand X-Cellerator 2V. Never cut on except for the little notch on the carb flange to clear the choke hardware on the Holley carb. The newest Weiand casting of this intake has a different shaped flange to alleviate that issue. Not like it's a big deal. All threads perfect. In extremely good condition. Was still low profile enough to run my Ram-Air air cleaner (barely). Picked up approx 30rwhp and 20 ft/lbs of torque with this intake vs an Edelbrock Performer 2v. No lack of streetability. I really liked this intake but it will not fit my new 4V headed engine. $140 plus shipping.
Driveshaft:
Stock driveshaft plus yoke and universals for a 351c with a 4-speed Toploader 71-73 application. 51" from hole-to-hole. Good shape, I'm just installing an aluminum driveshaft in my car. $100 plus shipping.
71-73 Exhaust Trumpets:
In really great shape. Good chrome. A rub mark from the spring shackle but nothing major. I upgraded to 2.5" exhaust and these will no longer fit. $75 plus shipping
Shortblock: SOLD
Let me know if you have any questions or concerns.
Last edited by a moderator: