• If you have bought, sold or gained information from our Classifieds, please donate to 7173 Mustangs.com and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts For Sale Quarter window kit/conversion, engine brackets, trans crossmembers, grille, conv interior quarter panels, lock rods, and more

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 8, 2019
Messages
748
Reaction score
270
Location
Missouri
My Car
1971 Mustang Convertible
1971 Mustang Mach I
1972 Mexican GT-351
1971 Mustang Convertible
1988 Bronco II
1970 Torino 4 door
Most of the parts have been refinished. Some of them have underlying pitting so ask for pics if not shown. I am still processing some other parts but will list them separately so interested parties will not need to wonder. All prices are plus shipping. I live just outside St. Louis if someone wants to pickup. not all pics are posted, seems kinda like spam if I did that:unsure:

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325 (Sold)
D3ZP-7A020-AA 73 C6 trans dipstick Mustang $50
D0AE-6750-C 70 351W Dipstick $25
D0AE-6750-A 351C oil dipstick $35
D3OP-7A020-AA trans dipstick $25
71-3 plus other years Mustang Shift selector rod bolt $10
66 Fairlane? Rod bolt from C6OP-7B112-A $10
C6OP-7B112-A 66 Fairlane? reverse rod $35
Likely manual trans rods from 60's Fairlane, set of 3, $45
71-3 Mustang deluxe glove box door and hinge, will clean up fine, $40, can refurbish for $20 more *need to get the charcoal paint so it may be delayed a bit
D0ZA-2882-C 70-73 351C A/C mounting bracket $100(Sold)
71-3 Mustang radiator to radiator support top seal $20
71-3 Mustang radio bezel, radio control holes slotted $15
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler is ok) $200
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler needs to be replaced) $100
71-3 Mustang protection group quarter pieces, $20 for both
71-3 Mustang protection group door pieces, $100 for both, plastic pulled up at end of one piece
71-3 Mustang convertible interior center trim above windows, painted $60
71-2 Mustang standard grille, no cracks, could use some cosmetic cleanup, $400 (Sold)
71-2 Mustang LH fender, some dents but NO rust thru, $150 (Sold)
71-2 Mustang RH fender, some dents and NO rust thru, $150 (Sold)
71-3 Mustang convertible/coupe trunk lid, one small area has rust bubble, LH bottom corner, $150 (Sold)
71-3 Mustand rear valance, not exhaust cutouts, early 71 style, needs some work, $70 (Sold)
71-3 Mustang rocker panel molding, one large dent, scuffs and it shows its age, $20
73 Mustang Grille lights, center of one is cracked, $20/pair
73 Mustang Grille light housings (argent), tab on one is broken, $25/pair
73 Mustang Grille light backing housings, both are chipped in mounting area, $15/pair
351C accelerator cable bracket (on intake manifold) $50 (sold)
351C timing pointer, some pitting, $25
D1ZA-7F330-CA 71-3 Mustang FMX trans lock rod, $35
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75 (sold)
C8OA-7340 68 Fairlane(?) shift rod Auto trans, $65
71-73 Mustang seats, very good cores with good seat tracks and fasten seat belt sensor, $450, will separate each seat minus tracks $160, track with release mech/rod $100, track without release knob, $75
71 Mustang convertible interior rear quarter panels, red but painted black and have speaker holes, $150
73 Mustang convertible interior rear quarter panels, blk, scuffed but very restoreable, $400 (Sold)
73 Mustang front valance, very nice, did not see any dents, $125
71-2 Mustang LH quarter extension, needs work, $20 (Sold)
71-2 Mustang RH quarter extension, needs work, $20 (Sold)
71-3 Mustang evap canister bracket, $25 (Sold)
70-3 Mustang/Cougar D0OE-10156-A A/C Idler Bracket 351C engine, $30
D1OA-3C511-(AA) 71-3 Mustang 351C power steering bracket, $35
D1ZA-3C511-AB 71-3 Mustang 351C power steering bracket, $50
D3AE-10145-CA 73 Mustang 302/351 alternator bracket, stamper Motorcraft, $25
71-3 Mustang 4sp transmission crossmember bracket, correct for 71-2, will work on 73, $75 (sold)
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100 (sold)
 

Attachments

  • PXL_20231114_200250009.jpg
    PXL_20231114_200250009.jpg
    1.1 MB · Views: 1
  • PXL_20231113_221600721.jpg
    PXL_20231113_221600721.jpg
    1.1 MB · Views: 0
  • PXL_20231114_202654235.jpg
    PXL_20231114_202654235.jpg
    1 MB · Views: 0
  • PXL_20231114_203227659.jpg
    PXL_20231114_203227659.jpg
    1.3 MB · Views: 1
  • PXL_20231114_203504587.jpg
    PXL_20231114_203504587.jpg
    1.1 MB · Views: 0
  • PXL_20231114_203636124.jpg
    PXL_20231114_203636124.jpg
    1.1 MB · Views: 0
  • PXL_20231114_203827755.jpg
    PXL_20231114_203827755.jpg
    1 MB · Views: 0
  • PXL_20231114_204148127.jpg
    PXL_20231114_204148127.jpg
    1 MB · Views: 0
  • PXL_20231114_204532804.jpg
    PXL_20231114_204532804.jpg
    1 MB · Views: 0
  • PXL_20231114_204535179.jpg
    PXL_20231114_204535179.jpg
    1.2 MB · Views: 0
  • PXL_20231114_204536676.jpg
    PXL_20231114_204536676.jpg
    1.2 MB · Views: 0
  • PXL_20231114_204538600.jpg
    PXL_20231114_204538600.jpg
    1.2 MB · Views: 0
  • PXL_20231114_204540316.jpg
    PXL_20231114_204540316.jpg
    1 MB · Views: 0
  • PXL_20231114_204711197.MP.jpg
    PXL_20231114_204711197.MP.jpg
    729.3 KB · Views: 0
  • PXL_20231114_204810465.jpg
    PXL_20231114_204810465.jpg
    1 MB · Views: 0
  • PXL_20231114_204944282.jpg
    PXL_20231114_204944282.jpg
    1.2 MB · Views: 0
  • PXL_20231114_204950309.jpg
    PXL_20231114_204950309.jpg
    1.2 MB · Views: 0
  • PXL_20231114_205224913.jpg
    PXL_20231114_205224913.jpg
    1.1 MB · Views: 0
  • PXL_20231114_210338747.jpg
    PXL_20231114_210338747.jpg
    1 MB · Views: 0
  • PXL_20231114_214508531.jpg
    PXL_20231114_214508531.jpg
    1.1 MB · Views: 0
  • PXL_20231114_214603709.jpg
    PXL_20231114_214603709.jpg
    1.1 MB · Views: 0
  • PXL_20231114_214646357.jpg
    PXL_20231114_214646357.jpg
    1 MB · Views: 0
  • PXL_20231114_214916242.jpg
    PXL_20231114_214916242.jpg
    1.1 MB · Views: 0
  • PXL_20231114_214918563.jpg
    PXL_20231114_214918563.jpg
    1.1 MB · Views: 0
Last edited:
Some more pics.
 

Attachments

  • PXL_20231114_215033769.jpg
    PXL_20231114_215033769.jpg
    1.1 MB · Views: 0
  • PXL_20231114_234538968.jpg
    PXL_20231114_234538968.jpg
    1 MB · Views: 0
  • PXL_20231114_234511318.jpg
    PXL_20231114_234511318.jpg
    1 MB · Views: 0
  • PXL_20231114_234442758.jpg
    PXL_20231114_234442758.jpg
    1 MB · Views: 0
  • PXL_20231114_234433177.jpg
    PXL_20231114_234433177.jpg
    1.1 MB · Views: 0
  • PXL_20231114_234356679.jpg
    PXL_20231114_234356679.jpg
    1.1 MB · Views: 0
  • PXL_20231114_234336806.jpg
    PXL_20231114_234336806.jpg
    1 MB · Views: 0
  • PXL_20231114_232500131.jpg
    PXL_20231114_232500131.jpg
    1 MB · Views: 0
  • PXL_20231114_232347643.jpg
    PXL_20231114_232347643.jpg
    1 MB · Views: 0
  • PXL_20231114_232336325.jpg
    PXL_20231114_232336325.jpg
    1,013.2 KB · Views: 0
  • PXL_20231114_215039098.jpg
    PXL_20231114_215039098.jpg
    1.1 MB · Views: 0
Most of the parts have been refinished. Some of them have underlying pitting so ask for pics if not shown. I am still processing some other parts but will list them separately so interested parties will not need to wonder. All prices are plus shipping. I live just outside St. Louis if someone wants to pickup. not all pics are posted, seems kinda like spam if I did that:unsure:

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
D3ZP-7A020-AA 73 C6 trans dipstick Mustang $50
D0AE-6750-C 70 351W Dipstick $25
D0AE-6750-A 351C oil dipstick $35
D3OP-7A020-AA trans dipstick $25
71-3 plus other years Mustang Shift selector rod bolt $10
66 Fairlane? Rod bolt from C6OP-7B112-A $10
C6OP-7B112-A 66 Fairlane? reverse rod $35
Likely manual trans rods from 60's Fairlane, set of 3, $45
71-3 Mustang deluxe glove box door and hinge, will clean up fine, $40, can refurbish for $20 more *need to get the charcoal paint so it may be delayed a bit
D0ZA-2882-C 70-73 351C A/C mounting bracket $100
71-3 Mustang radiator to radiator support top seal $20
71-3 Mustang radio bezel, radio control holes slotted $15
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler is ok) $200
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler needs to be replaced) $100
71-3 Mustang protection group quarter pieces, $20 for both
71-3 Mustang protection group door pieces, $100 for both, plastic pulled up at end of one piece
71-3 Mustang convertible interior center trim above windows, painted $60
71-2 Mustang standard grille, no cracks, could use some cosmetic cleanup, $400
71-2 Mustang LH fender, some dents but NO rust thru, $150
71-2 Mustang RH fender, some dents and NO rust thru, $150
71-3 Mustang convertible/coupe trunk lid, one small area has rust bubble, LH bottom corner, $150
71-3 Mustand rear valance, not exhaust cutouts, early 71 style, needs some work, $70
71-3 Mustang rocker panel molding, one large dent, scuffs and it shows its age, $20
73 Mustang Grille lights, center of one is cracked, $20/pair
73 Mustang Grille light housings (argent), tab on one is broken, $25/pair
73 Mustang Grille light backing housings, both are chipped in mounting area, $15/pair
351C accelerator cable bracket (on intake manifold) $50
351C timing pointer, some pitting, $25
D1ZA-7F330-CA 71-3 Mustang FMX trans lock rod, $35
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
C8OA-7340 68 Fairlane(?) shift rod Auto trans, $65
71-73 Mustang seats, very good cores with good seat tracks and fasten seat belt sensor, $450, will separate each seat minus tracks $160, track with release mech/rod $100, track without release knob, $75
71 Mustang convertible interior rear quarter panels, red but painted black and have speaker holes, $150
73 Mustang convertible interior rear quarter panels, blk, scuffed but very restoreable, $400
73 Mustang front valance, very nice, did not see any dents, $125
71-2 Mustang LH quarter extension, needs work, $20
71-2 Mustang RH quarter extension, needs work, $20
71-3 Mustang evap canister bracket, $25
70-3 Mustang/Cougar D0OE-10156-A A/C Idler Bracket 351C engine, $30
D1OA-3C511-(AA) 71-3 Mustang 351C power steering bracket, $35
D1ZA-3C511-AB 71-3 Mustang 351C power steering bracket, $50
D3AE-10145-CA 73 Mustang 302/351 alternator bracket, stamper Motorcraft, $25
71-3 Mustang 4sp transmission crossmember bracket, correct for 71-2, will work on 73, $75
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100
Interested in radiator top seal. Did not see pic, could you provide one please. Also shipping to 44406.

Thanks!
Mac
 
Hello, I'm interested in;
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
351C accelerator cable bracket (on intake manifold) $50

Do you have pictures of the lock rod and acc. cable bracket?
Is the only difference on 71/72 to 73 trany bracket the hole between the rubber mount holes?

Thanks,
James
 
Interested in radiator top seal. Did not see pic, could you provide one please. Also shipping to 44406.

Thanks!
Mac
It needs more cleaning and clips are rusty. I can try bead blasting the clips? Would do so with them on the seal.
 

Attachments

  • PXL_20231114_203004023.jpg
    PXL_20231114_203004023.jpg
    1 MB · Views: 1
Last edited:
Hello, I'm interested in;
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
351C accelerator cable bracket (on intake manifold) $50

Do you have pictures of the lock rod and acc. cable bracket?
Is the only difference on 71/72 to 73 trany bracket the hole between the rubber mount holes?

Thanks,
James
Pics enclosed. the 73 tranny bracket has the additional hole and is also reinforced via a second plate for all 3 of the holes. I have a 429 correct one but keeping it. I can send you side by side pics if you would like?
 

Attachments

  • PXL_20231114_214150624.jpg
    PXL_20231114_214150624.jpg
    1 MB · Views: 0
  • PXL_20231114_214155295.jpg
    PXL_20231114_214155295.jpg
    1 MB · Views: 0
  • PXL_20231114_214222352.jpg
    PXL_20231114_214222352.jpg
    1 MB · Views: 0
  • PXL_20231114_214237494.jpg
    PXL_20231114_214237494.jpg
    981.2 KB · Views: 0
  • PXL_20231114_214253610.jpg
    PXL_20231114_214253610.jpg
    1 MB · Views: 0
  • PXL_20231114_234538968.jpg
    PXL_20231114_234538968.jpg
    1 MB · Views: 0
  • PXL_20231114_234554218.jpg
    PXL_20231114_234554218.jpg
    1 MB · Views: 0
I would like to purchase these items from you.

71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
351C accelerator cable bracket (on intake manifold) $50

Zip is 97016
Do you take Paypal?
 
I would like to purchase these items from you.

71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
351C accelerator cable bracket (on intake manifold) $50

Zip is 97016
Do you take Paypal?
Paypal, venmo, zelle, snail mail, etc. Cheapest shipping is USPS at $12. [email protected], Chris Walker, 636-373-1872
 
71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
still available?
can I use my current glass?
shipping to 48348?
If you have a Mach 1 or sportsroof you have to use your glass. The coupe and convertible are the same. The fastbacks are different. I don't mind keeping the glass as a spare set and also safer to ship sans glass
 
Most of the parts have been refinished. Some of them have underlying pitting so ask for pics if not shown. I am still processing some other parts but will list them separately so interested parties will not need to wonder. All prices are plus shipping. I live just outside St. Louis if someone wants to pickup. not all pics are posted, seems kinda like spam if I did that:unsure:

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
D3ZP-7A020-AA 73 C6 trans dipstick Mustang $50
D0AE-6750-C 70 351W Dipstick $25
D0AE-6750-A 351C oil dipstick $35
D3OP-7A020-AA trans dipstick $25
71-3 plus other years Mustang Shift selector rod bolt $10
66 Fairlane? Rod bolt from C6OP-7B112-A $10
C6OP-7B112-A 66 Fairlane? reverse rod $35
Likely manual trans rods from 60's Fairlane, set of 3, $45
71-3 Mustang deluxe glove box door and hinge, will clean up fine, $40, can refurbish for $20 more *need to get the charcoal paint so it may be delayed a bit
D0ZA-2882-C 70-73 351C A/C mounting bracket $100
71-3 Mustang radiator to radiator support top seal $20
71-3 Mustang radio bezel, radio control holes slotted $15
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler is ok) $200
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler needs to be replaced) $100
71-3 Mustang protection group quarter pieces, $20 for both
71-3 Mustang protection group door pieces, $100 for both, plastic pulled up at end of one piece
71-3 Mustang convertible interior center trim above windows, painted $60
71-2 Mustang standard grille, no cracks, could use some cosmetic cleanup, $400
71-2 Mustang LH fender, some dents but NO rust thru, $150
71-2 Mustang RH fender, some dents and NO rust thru, $150
71-3 Mustang convertible/coupe trunk lid, one small area has rust bubble, LH bottom corner, $150
71-3 Mustand rear valance, not exhaust cutouts, early 71 style, needs some work, $70
71-3 Mustang rocker panel molding, one large dent, scuffs and it shows its age, $20
73 Mustang Grille lights, center of one is cracked, $20/pair
73 Mustang Grille light housings (argent), tab on one is broken, $25/pair
73 Mustang Grille light backing housings, both are chipped in mounting area, $15/pair
351C accelerator cable bracket (on intake manifold) $50
351C timing pointer, some pitting, $25
D1ZA-7F330-CA 71-3 Mustang FMX trans lock rod, $35
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75
C8OA-7340 68 Fairlane(?) shift rod Auto trans, $65
71-73 Mustang seats, very good cores with good seat tracks and fasten seat belt sensor, $450, will separate each seat minus tracks $160, track with release mech/rod $100, track without release knob, $75
71 Mustang convertible interior rear quarter panels, red but painted black and have speaker holes, $150
73 Mustang convertible interior rear quarter panels, blk, scuffed but very restoreable, $400
73 Mustang front valance, very nice, did not see any dents, $125
71-2 Mustang LH quarter extension, needs work, $20
71-2 Mustang RH quarter extension, needs work, $20
71-3 Mustang evap canister bracket, $25
70-3 Mustang/Cougar D0OE-10156-A A/C Idler Bracket 351C engine, $30
D1OA-3C511-(AA) 71-3 Mustang 351C power steering bracket, $35
D1ZA-3C511-AB 71-3 Mustang 351C power steering bracket, $50
D3AE-10145-CA 73 Mustang 302/351 alternator bracket, stamper Motorcraft, $25
71-3 Mustang 4sp transmission crossmember bracket, correct for 71-2, will work on 73, $75
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100
I have a question that you may or may not be able to answer. I have a 1972 351 Cleveland motor and I cannot read the numbers on the harmonic balancer, but I can clearly see the notches and know where TDC is so that's not a problem. My question is do you know how many degrees each short line represents? I'm suspecting that the short ones are either one or two degrees. Any idea how many degrees each mark represents? Thanks, in advance, for any help you can provide on this.
 
I have a question that you may or may not be able to answer. I have a 1972 351 Cleveland motor and I cannot read the numbers on the harmonic balancer, but I can clearly see the notches and know where TDC is so that's not a problem. My question is do you know how many degrees each short line represents? I'm suspecting that the short ones are either one or two degrees. Any idea how many degrees each mark represents? Thanks, in advance, for any help you can provide on this.
This is not the place to post this. Start a new post. Don't add a question like this onto the end of a parts listing.
 
I have a question that you may or may not be able to answer. I have a 1972 351 Cleveland motor and I cannot read the numbers on the harmonic balancer, but I can clearly see the notches and know where TDC is so that's not a problem. My question is do you know how many degrees each short line represents? I'm suspecting that the short ones are either one or two degrees. Any idea how many degrees each mark represents? Thanks, in advance, for any help you can provide on this.
Sent you a PM
 
Most of the parts have been refinished. Some of them have underlying pitting so ask for pics if not shown. I am still processing some other parts but will list them separately so interested parties will not need to wonder. All prices are plus shipping. I live just outside St. Louis if someone wants to pickup. not all pics are posted, seems kinda like spam if I did that:unsure:

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
D3ZP-7A020-AA 73 C6 trans dipstick Mustang $50
D0AE-6750-C 70 351W Dipstick $25
D0AE-6750-A 351C oil dipstick $35
D3OP-7A020-AA trans dipstick $25
71-3 plus other years Mustang Shift selector rod bolt $10
66 Fairlane? Rod bolt from C6OP-7B112-A $10
C6OP-7B112-A 66 Fairlane? reverse rod $35
Likely manual trans rods from 60's Fairlane, set of 3, $45
71-3 Mustang deluxe glove box door and hinge, will clean up fine, $40, can refurbish for $20 more *need to get the charcoal paint so it may be delayed a bit
D0ZA-2882-C 70-73 351C A/C mounting bracket $100
71-3 Mustang radiator to radiator support top seal $20
71-3 Mustang radio bezel, radio control holes slotted $15
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler is ok) $200
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler needs to be replaced) $100
71-3 Mustang protection group quarter pieces, $20 for both
71-3 Mustang protection group door pieces, $100 for both, plastic pulled up at end of one piece
71-3 Mustang convertible interior center trim above windows, painted $60
71-2 Mustang standard grille, no cracks, could use some cosmetic cleanup, $400
71-2 Mustang LH fender, some dents but NO rust thru, $150
71-2 Mustang RH fender, some dents and NO rust thru, $150
71-3 Mustang convertible/coupe trunk lid, one small area has rust bubble, LH bottom corner, $150
71-3 Mustand rear valance, not exhaust cutouts, early 71 style, needs some work, $70
71-3 Mustang rocker panel molding, one large dent, scuffs and it shows its age, $20
73 Mustang Grille lights, center of one is cracked, $20/pair
73 Mustang Grille light housings (argent), tab on one is broken, $25/pair
73 Mustang Grille light backing housings, both are chipped in mounting area, $15/pair
351C accelerator cable bracket (on intake manifold) $50 (pending)
351C timing pointer, some pitting, $25
D1ZA-7F330-CA 71-3 Mustang FMX trans lock rod, $35
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75 (pending)
C8OA-7340 68 Fairlane(?) shift rod Auto trans, $65
71-73 Mustang seats, very good cores with good seat tracks and fasten seat belt sensor, $450, will separate each seat minus tracks $160, track with release mech/rod $100, track without release knob, $75
71 Mustang convertible interior rear quarter panels, red but painted black and have speaker holes, $150
73 Mustang convertible interior rear quarter panels, blk, scuffed but very restoreable, $400
73 Mustang front valance, very nice, did not see any dents, $125
71-2 Mustang LH quarter extension, needs work, $20
71-2 Mustang RH quarter extension, needs work, $20
71-3 Mustang evap canister bracket, $25
70-3 Mustang/Cougar D0OE-10156-A A/C Idler Bracket 351C engine, $30
D1OA-3C511-(AA) 71-3 Mustang 351C power steering bracket, $35
D1ZA-3C511-AB 71-3 Mustang 351C power steering bracket, $50
D3AE-10145-CA 73 Mustang 302/351 alternator bracket, stamper Motorcraft, $25
71-3 Mustang 4sp transmission crossmember bracket, correct for 71-2, will work on 73, $75
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100 (pending)
Hi, I'm Rob from Surrey BC, I have a 71 HT, looking through your list, was wondering if you had the center bracket for a mach 1 grill, I swapped out the stock grille not realizing that the M1 grille requires an extra bracket, thanks for your time, have a great day:)
 
Hi, I'm Rob from Surrey BC, I have a 71 HT, looking through your list, was wondering if you had the center bracket for a mach 1 grill, I swapped out the stock grille not realizing that the M1 grille requires an extra bracket, thanks for your time, have a great day:)
Not for sale and the early ones are rather difficult to find. Do you have two vertical hood latch supports or just one? Same car in attached pics. The light gray (now repainted to dark gray) vertical supports were used for I think most of 71. Ford switched to the single vertical support later in 71 model year. I paid $50 for a single one of the dual ones. I think I paid $75 each for a couple more to have spares. Gilbert Davenport in Edwardsville, IL may have some. I bought the pair from him. Just make sure you get the right part before dropping money on a part you don't need (or like me, buy it then find you already had it the day before the just purchased one is delivered)
 

Attachments

  • PXL_20231027_022452140.MP.jpg
    PXL_20231027_022452140.MP.jpg
    798.7 KB · Views: 1
  • 20220704_064108.jpg
    20220704_064108.jpg
    436.8 KB · Views: 1
Most of the parts have been refinished. Some of them have underlying pitting so ask for pics if not shown. I am still processing some other parts but will list them separately so interested parties will not need to wonder. All prices are plus shipping. I live just outside St. Louis if someone wants to pickup. not all pics are posted, seems kinda like spam if I did that:unsure:

71-3 Mustang rear quarter window "kit" to convert Mach 1/Sportsroof to operable quarter windows. with glass $400, without glass $325
D3ZP-7A020-AA 73 C6 trans dipstick Mustang $50
D0AE-6750-C 70 351W Dipstick $25
D0AE-6750-A 351C oil dipstick $35
D3OP-7A020-AA trans dipstick $25
71-3 plus other years Mustang Shift selector rod bolt $10
66 Fairlane? Rod bolt from C6OP-7B112-A $10
C6OP-7B112-A 66 Fairlane? reverse rod $35
Likely manual trans rods from 60's Fairlane, set of 3, $45
71-3 Mustang deluxe glove box door and hinge, will clean up fine, $40, can refurbish for $20 more *need to get the charcoal paint so it may be delayed a bit
D0ZA-2882-C 70-73 351C A/C mounting bracket $100
71-3 Mustang radiator to radiator support top seal $20
71-3 Mustang radio bezel, radio control holes slotted $15
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler is ok) $200
D1AA-2A964-AA 71 351C Idler pulley bracket and idler (idler needs to be replaced) $100
71-3 Mustang protection group quarter pieces, $20 for both
71-3 Mustang protection group door pieces, $100 for both, plastic pulled up at end of one piece
71-3 Mustang convertible interior center trim above windows, painted $60
71-2 Mustang standard grille, no cracks, could use some cosmetic cleanup, $400
71-2 Mustang LH fender, some dents but NO rust thru, $150
71-2 Mustang RH fender, some dents and NO rust thru, $150
71-3 Mustang convertible/coupe trunk lid, one small area has rust bubble, LH bottom corner, $150
71-3 Mustand rear valance, not exhaust cutouts, early 71 style, needs some work, $70
71-3 Mustang rocker panel molding, one large dent, scuffs and it shows its age, $20
73 Mustang Grille lights, center of one is cracked, $20/pair
73 Mustang Grille light housings (argent), tab on one is broken, $25/pair
73 Mustang Grille light backing housings, both are chipped in mounting area, $15/pair
351C accelerator cable bracket (on intake manifold) $50 (pending)
351C timing pointer, some pitting, $25
D1ZA-7F330-CA 71-3 Mustang FMX trans lock rod, $35
D1ZA-7E330-BA 71-3 Mustang C6 trans lock rod, $75 (pending)
C8OA-7340 68 Fairlane(?) shift rod Auto trans, $65
71-73 Mustang seats, very good cores with good seat tracks and fasten seat belt sensor, $450, will separate each seat minus tracks $160, track with release mech/rod $100, track without release knob, $75
71 Mustang convertible interior rear quarter panels, red but painted black and have speaker holes, $150
73 Mustang convertible interior rear quarter panels, blk, scuffed but very restoreable, $400
73 Mustang front valance, very nice, did not see any dents, $125
71-2 Mustang LH quarter extension, needs work, $20
71-2 Mustang RH quarter extension, needs work, $20
71-3 Mustang evap canister bracket, $25
70-3 Mustang/Cougar D0OE-10156-A A/C Idler Bracket 351C engine, $30
D1OA-3C511-(AA) 71-3 Mustang 351C power steering bracket, $35
D1ZA-3C511-AB 71-3 Mustang 351C power steering bracket, $50
D3AE-10145-CA 73 Mustang 302/351 alternator bracket, stamper Motorcraft, $25
71-3 Mustang 4sp transmission crossmember bracket, correct for 71-2, will work on 73, $75
71-3 Mustang C6 transmission crossmember bracket, correct for 73, will work on 71-3 incl 429, $100 (pending)
I sent a PM, thanks for any help you can provide!
 

Latest posts

Back
Top