- Joined
- Aug 27, 2021
- Messages
- 334
- Reaction score
- 127
- Location
- Williamsburg Virginia area
- My Car
- 1972 H code convert., 351C 2V, FMX, 9in., Ram air, Pwr Steering, Pwr Disc brakes, air-conditioning, 15" sport wheels, Ivy Glo w/white deluxe interior.
1) Hood latch only, no bracket, has been completely stripped and refinished. Two-tone to match what some others have replicated. Initially treated with Eastwood After Blast, then multiple coats (4) of good quality primer (Seymour self-etching) and paint (8) (Seymour Stainless Blast/VHT rollbar and chassis black). Date code has been shown to all those searching for numbers matching parts. $85.00 plus shipping.
2) 1971-72 Outboard mounted seatback latch retractors. refurbished and ready to install. The actuators have not been painted and remain bare metal since they have not been disassembled. However, they did function during a bench test a friend performed and painting them would also hide the fact of what extremely good condition they support.Wire harnesses continuity check good also no cuts and frays except for a wire on an actuator has a bare spot from wear but it was wrapped with splicing tape and no bare strands are visible. All connectors and even wire in like-new condition. Harnesses rewrapped with new cloth wire harness tape and individual seat harnesses were attended to as well, but they only required tape at the "elbow" brackets to keep them from shifting. Comes complete with all parts seen, unfortunately, the knobs are still attached to my old seats, missing a couple screws (shop-vac ate 2) of which shouldn’t be difficult to replace and one spring broke. That can be replace by the latch already in your seat since I need to keep the remaining two I have.
Please know I’m mixed about selling, unfortunately, unforeseen things have necessitated a bit of robbing Peter to pay Paul at the moment so, hope they can help someone in need.
$275.00 plus shipping or make an offer.
2) 1971-72 Outboard mounted seatback latch retractors. refurbished and ready to install. The actuators have not been painted and remain bare metal since they have not been disassembled. However, they did function during a bench test a friend performed and painting them would also hide the fact of what extremely good condition they support.Wire harnesses continuity check good also no cuts and frays except for a wire on an actuator has a bare spot from wear but it was wrapped with splicing tape and no bare strands are visible. All connectors and even wire in like-new condition. Harnesses rewrapped with new cloth wire harness tape and individual seat harnesses were attended to as well, but they only required tape at the "elbow" brackets to keep them from shifting. Comes complete with all parts seen, unfortunately, the knobs are still attached to my old seats, missing a couple screws (shop-vac ate 2) of which shouldn’t be difficult to replace and one spring broke. That can be replace by the latch already in your seat since I need to keep the remaining two I have.
Please know I’m mixed about selling, unfortunately, unforeseen things have necessitated a bit of robbing Peter to pay Paul at the moment so, hope they can help someone in need.
$275.00 plus shipping or make an offer.
