Body work video's, tips, other material?

[scgamecock]

Are there any good video's that do a good job at covering bodywork from basic dent removal to body panel replacements? Any other good reference and\or how to material? I have extensive experience with fiberglass having restored a 1971 corvette but until I got my '72 Mach 1 I have never messed with metal. I picked up a metal body tool kit from harbor freight that has the various hammer's and dollies'. I also have a mig welder but not great at using it yet. I don't think I will have any full on panel replacement other than maybe the rear lower panel just behind the tire at the bottom. This may not need anything more than a fabbed up spot patch. My main issues are various small dents and dings with only 2 significant dents but both are in a body line.

Thanks!

Wade

 

[Carolina_Mountain_Mustangs]

Are there any good video's that do a good job at covering bodywork from basic dent removal to body panel replacements? Any other good reference and\or how to material? I have extensive experience with fiberglass having restored a 1971 corvette but until I got my '72 Mach 1 I have never messed with metal. I picked up a metal body tool kit from harbor freight that has the various hammer's and dollies'. I also have a mig welder but not great at using it yet. I don't think I will have any full on panel replacement other than maybe the rear lower panel just behind the tire at the bottom. This may not need anything more than a fabbed up spot patch. My main issues are various small dents and dings with only 2 significant dents but both are in a body line.

Thanks!

Wade

Sent you a PM

 

[midlife]

One of the best books (an oldie but goodie!) on the market on bending metal:

https://www.amazon.com/Martin-BFB-Bumping-Manual-Instruction/dp/B001GUZP4O/ref=sr_1_1?ie=UTF8&qid=1506603543&sr=8-1&keywords=key+to+metal+bumping

Follow this and you won't go wrong.