wrobinson
Well-known member
- Joined
- Oct 28, 2016
- Messages
- 102
- Reaction score
- 3
- Location
- USA
- My Car
- My 13 year old wants to build a 1971-73 Mach 1 Mustang for his first car. We have found a Grabber Blue with white interior base model 1971 Mach 1 to start on.
I would like suggestions on a hydraulic flat tappet camshaft for a 4V 408C build that will primarily be a daily driver. The compression ratio will be around 9:1-9.3:1. The car is equipped with A/C, power steering, and power brakes. The rear gear ratio is 3.50. The transmission will more than likely be a non electronic AOD. I would like to shoot for 375-400hp and 375-400tq. The most important thing is idle quality for fuel injection, A/C and vacuum PSI for power accessories
Other information:
Heads are 4V D3ZE with 2.07 intake and 1.66 exhaust Ferrera valves, Crane pedestal conversion kit, and Comp Cams roller rockers.
Intake will be either a Blue Thunder, Scott Cook or Eddy RPM dual plane.
Induction will be an EZ EFI or FiTech system.
Please understand this build is for my 13 year old sons 1973 Mach 1 Mustang.
Some cams I was looking at: Comp Magnum 280, Comp XE274
Other information:
Heads are 4V D3ZE with 2.07 intake and 1.66 exhaust Ferrera valves, Crane pedestal conversion kit, and Comp Cams roller rockers.
Intake will be either a Blue Thunder, Scott Cook or Eddy RPM dual plane.
Induction will be an EZ EFI or FiTech system.
Please understand this build is for my 13 year old sons 1973 Mach 1 Mustang.
Some cams I was looking at: Comp Magnum 280, Comp XE274