Billpetsch
Member
- Joined
- Sep 11, 2013
- Messages
- 13
- Reaction score
- 0
- Location
- Maryland, US
- My Car
- 1971 Mach 1 being restored
I have a 71 Mach 1 and am looking for three parts
1.) Front crossmember where the strut rods connect. (It looked like someone hooked a tow hook into the hole to tow the car and tore the hole edges out of the crossmember. I could beat it back in and weld it but prefer to replace.
2.) The crossmember under the engine looks like someone used a narrow jack in the center and bent it as well.
3.) Lastly, the urethane bumper rear support bracket (mounted horizontally)
Any ideas for a source for good condition parts?
Thanks! Bill
1.) Front crossmember where the strut rods connect. (It looked like someone hooked a tow hook into the hole to tow the car and tore the hole edges out of the crossmember. I could beat it back in and weld it but prefer to replace.
2.) The crossmember under the engine looks like someone used a narrow jack in the center and bent it as well.
3.) Lastly, the urethane bumper rear support bracket (mounted horizontally)
Any ideas for a source for good condition parts?
Thanks! Bill